Furuno CSH-83, CSH-84 manual Erasable Marks and Data, Mark/Data Description

Mark/Data	Description
Own Ship's Mark	Shows own ship's present position. The direction of the arrow shows
	ship's heading. This mark moves with ship's movement in the * true
	motion mode. On all other modes it is fixed at the screen center.
* North Mark	When the CSH-83/84 is connected to a gyrocompass the mark is called
(or Heading Mark)	the north mark and points North. If there is no gyrocompass input
	it is the heading mark and points in the direction of own ship's heading.
Heading Data	This data requires gyrocompass input. Bearing is displayed in
	32-azimuth (N, N/E, etc.). Bearing can also be displayed in figures
	(for example, "360") by calling up the SYSTEM menu and selecting
	BRG READOUT-Course.
Trackball Mark	Sets own ship's mark location for off-center display; sets location for
	mark input. The trackball (or arrow keys on the remote control box)
	controls this mark.

Erasable Marks and Data

	Mark/Data		Description
Latest Event			These marks depict important locations. With speed log and gyro-
Mark			compass connection these marks follow ship’s movement. In the *true
			motion mode they are stationary. Ten marks, one latest and nine event
Event Mark			marks, can be entered. When more than ten marks are entered the
			oldest is erased to make room for the latest.
	1	1
Latest Event Mark			The position data of the latest event mark, that is, horizontal range (→),
Data			current depth (↓) and bearing. (	) shows the latest event mark’s
			original depth, and remains unchanged regardless of ship’s movement
	→		or tilt angle. When the event mark is erased the above data disappears
			from the screen.
	↓
			To erase an event mark, place the trackball mark on the event mark
(		)
			and press the EVENT key.
	B	°

(Continued on next page)

4-4