General Operation, Initial Setup, Zone Volume

GENERAL OPERATION

INITIAL SETUP

Important: The Tuner Region must be selected for correct operation. Default - USA.

See section: Tuner Region Selection

ADJUSTING THE VOLUME

Turn the ‘Rotary Encoder’ to adjust the volume.

ZONE VOLUME

Press the ‘Rotary Encoder’ to step through zones.

All zones Zone 1 Zone 2

SETTINGS

Press the ’Menu’ button and select ‘Settings’. Select the desired setting to adjust.

Note: Whilst in Settings the ‘Menu’ button acts as a back/return to the previous screen. Any key press exits the menu screen.

TONE — Adjust the Bass/Middle/Treble settings. Press the ‘Rotary Encoder’ to cycle between Bass/Middle/Treble

ZONE SETUP — The MS-RA205 Marine Stereo features Multi-Zone technology which enables 2 ‘Zones’ with independent volume/balance control.

Select the Zone you wish to setup.

Select ‘Balance’ to adjust the audio balance from left to right within the selected zone. Select ‘Volume Limit’ to set the maximum volume limit within the selected zone.

Select ‘Zone Name’ to give the zone a name of your choice. Rotate the rotary encoder to change the character. Press the rotary encoder to select. Press the ‘Previous’ button to delete characters

-To save changes press the ‘Play’ key

-To exit without saving any changes: press the ‘Menu’ key.

SUBWOOFER — Select ‘Settings’ then ‘Zones’ then ‘Subwoofer’.

Select ‘Sub level’ to set the desired maximum subwoofer output volume. Select ‘Sub Filter’ to select the desired cut-off frequency.

55Hz - 85Hz - 120Hz - 160Hz Default: 85Hz

Note: From any source screen press and Hold the `Rotary Encoder’ for quick access to subwoofer level adjustment