Tuner Region Australasia-Europe-Japan | Fusion MS-RA205 instruction

Tuner Region - Australasia-Europe-Japan

In these Tuner regions once the MS-BT200 is installed and connected the source will be available.

Please refer the MS-BT200 Installation Instructions for the following:

·Installing the MS-BT200 Bluetooth Module

·Bluetooth Pairing

·Choosing a Device from the paired list

Browsing Music Collections Over Bluetooth Not Supported

Browsing music collections from the MS-RA205 is not supported over Bluetooth. Initial song and Playlist selection must be done on the media device. However the FUSION Stereo does provide basic playback control with the Play / Pause, Next and Previous keys. Forward and Rewind functions are not supported.

Bluetooth DEVICE CONTROL

PLAY/PAUSE	Play or Pause the track
BACK/PREVIOUS	Short Press: Press once to jump back to start
	of current track.
	Press twice to select previous track.
NEXT/FORWARD	Short Press: Selects next track

Note: The availability of song information such as song title, artist name, track duration and album cover artwork is dependent on the capability of your phone and music application. Album cover artwork and Shuffle/Repeat Status icons are not supported over Bluetooth.

Bluetooth Settings

To change a setting in the Bluetooth settings menu:

1.Press the Menu key while the BT Source screen is displayed.

2.Turn and then press the Rotary Encoder to select one of the following;

• List of Paired Bluetooth media devices.

To connect to an active device on the Paired Devices list rotate the rotary encoder to select the device. Press the rotary encoder to select the check box.

The device must be turned on, with Bluetooth on and not connected to another Bluetooth device, otherwise it will not connect.

Discoverable Off/On

Enable this option to make the BT-200 Bluetooth module discoverable to Bluetooth media devices. Press the encoder to select/deselect the check box.

Note: To prevent interruption to audio streaming over Bluetooth it is recommended that the Discoverable feature is turned off after pairing your device to the MS-RA205.

Remove Devices

Select this option to display the current list of paired devices. Select the device to be removed by rotating and pressing the rotary encoder.