INSTALLATION
If any modification to the vessel is required, such as drilling holes etc fusion recommends consultation with your boat dealer or manufacturer beforehand.
Create mounting hole for product and drill Screw Pilot Holes. Refer to mounting template included with product or download from www.fusionelectronics.com
•Fit mounting gasket
•Insert the unit into the mounting hole
•Use the supplied 4 x self tapping screws, to affix the unit into position.
•Attach screw covers
Note: Appropriate mounting is very important to ensure correct operation. Select a location that allows both free/open airflow around rear of chassis, whilst minimizing exposure to moisture. Allow adequate room at the rear of the unit for the cable looms (approx 2”) and underneath the unit (approx 2”) if using a SiriusXM tuner (USA Only).
| Note: The head unit must not be mounted on more than a 45˚ angle |
45˚ | from the horizontal plain. Failure to follow mounting restrictions |
could void your warranty. |
4