Standard Horizon CP180I Mounting the CP 180 GPS Antenna, Flush mounting the CP180 antenna

Page 12

2.Drill a hole in one area of the cutout area that will allow the blade of a jig saw to be inserted. Insert and cut out the area on the panel using the jig saw.

3.Next drill the four holes required to insert the GPS chart plotter with the mounting studs.

4.Install the mounting studs on the GPS chart plotter and insert into the mounting hole.

5.Attach the GPS chart plotter to the mounting location by attaching the supplied hardware to the mounting studs.

Figure 2.2 - Example of GPS chart plotter Flush installation

2.3MOUNTING THE CP 180 GPS ANTENNA

The CP180 is supplied with a external GPS WAAS antenna with 30 feet of routing cable. This antenna is designed to be mounted on a base, installed on an extension or even flush mounted.

Choose a location for the antenna that has a clear view of the sky and is not located within 3 FT of RADAR or other transmitting antenna. Ensure there are no major obstructions or fixtures in the immediate proximity to the antenna. The antenna relies on direct “line of sight” satellite reception. If you are unsure of the chosen location, temporarily mount the antenna in the desired location to verify correct operation. If mounted close to RADAR, after the GPS chart plotter has a fix, turn on the Radar to ensure the GPS chart plotter holds the fix (use the GPS Status Page).

The thread used on the antenna is an industry standard (1inch 14TPI) used on a wide range of mounting brackets. Due to the manufacturing process of these mounting brackets you may see some slop when tightening down the antenna to the bracket. This is no concern however as the antenna must be tightened until the antenna stops rotating.

NOTE

The antenna cable can be cut and spliced to ease installation. Care must be taken when reconnecting the antenna cable to protect from water and corrosion.

2.3.0Flush mounting the CP180 antenna

NOTE

Before drilling holes, it is recommended the antenna be positioned where the location is planned, cable connected to the CP180 and power turned on to ensure a GPS Fix is received.

Page 14

 

CP180 / CP180i

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents CP180 / CP180i FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen Page Table of Contents MAP Functions Creating MarksRoutes TracksSpecifications AISTechnical Tests Appendix Terms Index Introduction General InformationPacking List 0 CP180C/180i Packing ListCP180 / CP180i Mounting the GPS Chart Plotter Getting StartedBracket Mounting Flush Mounting only for CPMounting the CP 180 GPS Antenna Flush mounting the CP180 antenna12VDC Power and Nmea Cable ConnectionsConnection Table Connection Yellow Port3 OutputBattery Connections Nmea ConnectionsGPS Position on a VHF Radio Optional Black BOX Fish FinderDemo Mode Outputting Nmea to a Personal ComputerNmea Data Page Page Controls and Indicators Controls and ConnectionsPower On, Off and ShuttlePoint knob operation Getting StartedCursor Vs. Home Mode Cursor ModeHome mode Cursor and Menu selection speedChanging the Ships Icon Changing the backlight and contrastAdjusting the Time Selecting North Up or Course UpAdjusting Time Changing the Chart Color Selecting Loran TD or Other Coordinate SystemOther Settings in General Setup Menu InformationChart and Optional devices information Page Using Find Services & More Function Port ServicesOther Available Searches Info on Lakes Quick Info On LakesFull Info On Lakes 1a Example of picture associated to the Fishing object Page New Data Features New Presentation FeaturesMAP MAX Overview Inserting the C-CARDMAX and NT/NT+ C-CARD coexistence MAP Functions MAX Functions MenuZoom Type Perspective ViewDynamic Nav-Aids 1 Perspective ViewBest Map Pictures & Diagrams How to show the pictures or diagrams of a Multimedia ObjectCurrents Prediction Enhanced Port Info 5b Example of Full Info on Multimedia objectPage Creating a NEW Mark Using the Chart Creating MarksEditing a Mark MarkDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List Creating a NEW Mark with the MARKS/WAYPOINTS ListGoto Cursor Goto MarkGoto Cursor Page Page MAN Over Board MOB Function Deleting a MOB PointPage Creating a Route Using Waypoints RoutesCreating a Route Using Marks on the Chart Making Additional RoutesOther Settings in Route Menu Inserting a Waypoint Into a RouteGoto a Route By select RoutePage Tracks TrackingOther Settings in Track Menu Using the Trip LOGSaving and starting a new Track ENTResetting the Trip Log Page User C-CARD User C-CARD MenuFormatting the User C-CARD Transferring files to the optional User C-CARD Loading a fileDeleting a file from the User C-CARD Refreshing the User C-CARDChart PagesAdditional Functions on Chart Window SelectionsDisplay Mode Turning Off Information on Icon PointsMarine Settings Depth SettingsLand Settings Chart SettingsUnderwater Objects Settings Customizing the Data WindowsCustomizing Chart Settings NavigationCompass Rose Highway CelestialGPS Status Nmea DisplayNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages Changing the Nmea page WindowsVHF Digital Selective Calling InterfacingDSC Distress Call Position Request Page Advanced Settings INPUT/OUTPUT NmeaNavigate Alarms CompassGrounding Alarm Page AIS AIS System DefinitionsTo SET the Chart Plotter for Receiving AIS AIS MenuQuick Info on AIS Target Vessel Name Mmsi number Radio Call SignSOG COG CPA and Tcpa valuesPage MAP Weather Service MAP Weather Service MenuDownload Copy From User C-CARD Weather ForecastReal Time View Type of DataTrouble Shooting Page RAM Menu reset Technical TestsSystem Test DIM MenuCartridges Serial PortsSpecifications SpecificationsMAP NT+/MAX C-CARD GPS Waas Smart Receiver Specifications Appendix Terms Units Index AltitudeMounting GPS Waas Smart Antenna Code S3e/igSH5c0ww 11.00cA77 Please Note
Related manuals
Manual 100 pages 33.72 Kb Manual 42 pages 55.96 Kb

CP180, CP180I specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents