Standard Horizon CP180I owner manual Units

Page 88

LOW WATER – The minimum level of the tide height in 24 hours.

Position Request – Marine DSC VHF Function of transmitting a GPS position to another Marine DSC VHF. When GPS chart plotter is connected to STANDARD HORIZON GPS the position of another vessel is shown on the Chart page.

SPEED – Shows the Speed Thru the Water when a Digital Speed Log is connected. SOG (Speed Over Ground) – The speed you vessel is traveling at.

STEER – Heading to steer to destination Waypoint. TIME – Shows the current time received by the GPS.

TRIP LOG – Shows the distance the vessel has traveled since the trip log was reset.

TRU Wind DIR SPD (Apparent Wind Direction) – Shows the True Wind Direction when a external wind instrument with NMEA is connected.

TRU Wind SPD (Apparent Wind Speed) – Shows the True Wind Speed when a external wind instrument with NMEA is connected.

TTG (Time To Go) – Shows time to go to reach a Destination point.

UNITS

Nm Nautical Mile (1 NM = 1.15 Sm or 1.85Km) Sm Statue Mile (1Sm = 0.87Nm or 1.61Km)

Km Kilometer (1 Kilometer = 0062 Sm or 0.54Nm) FT Feet. (1 Foot = 0.167 Fathoms or 0.305 Meters) FA Fathom (1 Fathom = 6 Feet or 1.83 Meters)

Mt Meter (1 Meter = 3.28 Feet or 0.55 Fathoms) Kts Knot (1 Knot = 1.15 MPH or 1.85 KPH)

MPH Miles Per Hour (1 MPH = 0.87 Knots or 1.61 KPH) Kmh Kilometer Per Hour (1 KPH = 0.54 Knots or 0.62 MPH)

VMG – It is the destination closing Velocity. The VMG is calculated using the current speed of the vessel (SOG) and the difference between the current vessel course and the bearing to the Destination.

WAAS 2D/3D – The GPS is receiving a 2D or 3D position and the correction from the WAAS Satellite. WAAS consists of approximately 25 ground reference stations positioned across the United States that monitor GPS satellite data. Two master stations, located on either coast, collect data from the reference stations and create a GPS correction message. This correction accounts for GPS satellite orbit and clock drift plus signal delays caused by the atmosphere and ionosphere. The corrected differential message is then broadcast through one of two geostationary satellites, or satellites with a fixed position over the equator. The information is compatible with the basic GPS signal structure, which means any WAAS- enabled GPS receiver can read the signal.

WATER TEMP – Shows the sea water temperature when the FF520 50/200kHz BLACK BOX FISH FINDER or a Digital Speed Log/Temp instrument with NMEA is connected.

XTE (Cross Track Error) – The distance your vessel is off course (left or right) to a Destination point.

Page 90

 

CP180 / CP180i

 

Image 88
Contents CP180 / CP180i FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen Page Table of Contents MAP Functions Creating MarksRoutes TracksAIS SpecificationsTechnical Tests Appendix Terms Index Introduction General InformationPacking List 0 CP180C/180i Packing ListCP180 / CP180i Mounting the GPS Chart Plotter Getting StartedBracket Mounting Flush Mounting only for CPMounting the CP 180 GPS Antenna Flush mounting the CP180 antennaConnections 12VDC Power and Nmea CableConnection Table Connection Yellow Port3 OutputBattery Connections Nmea ConnectionsGPS Position on a VHF Radio Optional Black BOX Fish FinderOutputting Nmea to a Personal Computer Demo ModeNmea Data Page Page Controls and Indicators Controls and ConnectionsPower On, Off and ShuttlePoint knob operation Getting StartedCursor Vs. Home Mode Cursor ModeHome mode Cursor and Menu selection speedChanging the Ships Icon Changing the backlight and contrastAdjusting the Time Selecting North Up or Course UpAdjusting Time Changing the Chart Color Selecting Loran TD or Other Coordinate SystemOther Settings in General Setup Menu InformationChart and Optional devices information Page Port Services Using Find Services & More FunctionOther Available Searches Quick Info On Lakes Info on LakesFull Info On Lakes 1a Example of picture associated to the Fishing object Page New Data Features New Presentation FeaturesMAP MAX Overview Inserting the C-CARDMAX and NT/NT+ C-CARD coexistence MAP Functions MAX Functions MenuZoom Type Perspective ViewDynamic Nav-Aids 1 Perspective ViewBest Map How to show the pictures or diagrams of a Multimedia Object Pictures & DiagramsCurrents Prediction Enhanced Port Info 5b Example of Full Info on Multimedia objectPage Creating a NEW Mark Using the Chart Creating MarksEditing a Mark MarkDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List Creating a NEW Mark with the MARKS/WAYPOINTS ListGoto Mark Goto CursorGoto Cursor Page Page MAN Over Board MOB Function Deleting a MOB PointPage Creating a Route Using Waypoints RoutesCreating a Route Using Marks on the Chart Making Additional RoutesOther Settings in Route Menu Inserting a Waypoint Into a RouteGoto a Route By select RoutePage Tracks TrackingOther Settings in Track Menu Using the Trip LOGSaving and starting a new Track ENTResetting the Trip Log Page User C-CARD Menu User C-CARDFormatting the User C-CARD Transferring files to the optional User C-CARD Loading a fileDeleting a file from the User C-CARD Refreshing the User C-CARDChart PagesAdditional Functions on Chart Window SelectionsDisplay Mode Turning Off Information on Icon PointsMarine Settings Depth SettingsLand Settings Chart SettingsUnderwater Objects Settings Customizing the Data WindowsNavigation Customizing Chart SettingsCompass Rose Highway CelestialGPS Status Nmea DisplayNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages Changing the Nmea page WindowsInterfacing VHF Digital Selective CallingDSC Distress Call Position Request Page INPUT/OUTPUT Nmea Advanced SettingsNavigate Alarms CompassGrounding Alarm Page AIS AIS System DefinitionsTo SET the Chart Plotter for Receiving AIS AIS MenuQuick Info on AIS Target Vessel Name Mmsi number Radio Call SignSOG COG CPA and Tcpa valuesPage MAP Weather Service Menu MAP Weather ServiceDownload Copy From User C-CARD Weather ForecastReal Time View Type of DataTrouble Shooting Page RAM Menu reset Technical TestsSystem Test DIM MenuCartridges Serial PortsSpecifications SpecificationsMAP NT+/MAX C-CARD GPS Waas Smart Receiver Specifications Appendix Terms Units Index AltitudeMounting GPS Waas Smart Antenna Code S3e/igSH5c0ww 11.00cA77 Please Note
Related manuals
Manual 100 pages 33.72 Kb Manual 42 pages 55.96 Kb

CP180, CP180I specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.