Standard Horizon CP180I owner manual Other Settings in General Setup Menu, Information

4.A popup window will be shown with Normal, Classic, NOAA, Night and Sunlight. Move the ShuttlePoint knob to the desired selection and press [ENT] or move the ShuttlePoint knob to the right.

5.Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the Chart page.

3.5OTHER SETTINGS IN GENERAL SETUP MENU

You will notice the GENERAL SETUP menu has other selections that allow you to customize:

TIME SETUP	Selects a sub-menu to allow the time setup. It is possible to set the GPS Time Offset,
	choosing the UTC or Local Time display, and the Time Format, switching 12 or 24 hours
	time format.
DATE FORMAT	Allows choosing date format MM-DD-YY or DD-MM-YY.
COURSE UP/NORTH UP	Selections are:
	North Up : The Top of the page is fixed to North
	Course Up: The top of the page is orientated to the direction the vessel is heading.
KEYPAD BEEP	Allows the beep produced when a key is pressed to be turned on or off.
UNITS OF MEASURE	Units of Measure can be selected for Distance, Speed, Depth, Altitude and Temperature.

NAV AIDS PRESENTATION Allows the Nav Aids presentation to be drawn using NOAA symbology when US is selected or International symbols will be used when International is selected. When selected these functions affect how the icons for Lights, Signals, Buoys and beacons are

	displayed.
DISPLAY COLOR	Changes the background colors of the chart page to enhance the visibility of the screen
	depending on the surrounding light conditions. Normal is recommended when the GPS
	chart plotter is not exposed to the direct sunlight. When this mode is set the maps are
	displayed in order to use colors as similar as possible to ones used in the original paper
	charts. Classic uses vivid chart colors presentation. NOAA allows setting NOAA paper
	chart colors presentation. Night is recommended when the environment is dark in order
	to reduce the glare of the display. The GPS chart plotter displays maps and screen in
	darker colors. Sunlight (default) is designed to enhance the visibility of the screen when
	the GPS chart plotter is exposed to sunlight. The maps are much brighter than in the other
	modes and the depth areas are filled with the white color so different depth areas are not
	easily distinguishable.
SHIP ICON	Allows selection of one of 5 choices of ship icons that represent your vessels position
	shown on the chart page.
CURSOR SPEED	Selects the preferred speed among Low, Medium and High for the cursor in the Chart page
	and within the menu.
MEASURE DISTANCE	When this function is turned on allows a distance to be measured between two points
	using the ShuttlePoint knob and [ENTER] key
WINDOWS SETUP	This menu selection allows the data windows to be customized on the Chart and
	Navigation pages.
LANGUAGE	Allows changing the language for menus and data screens.
AUTO INFO	By default when the cursor is moved over a buoy, Mark or other item a popup window will
	show information of the item. This menu item allows the window to be turned on or off.
CURSOR WINDOW	By default when the cursor is moved a window is shown with the lat/lon Distance and
	bearing from the vessels location to the cursor. This selection allows the window to be
	turned off.
CURSOR POSITION	The position of the cursor (vessels location) can be customized so it centered in the middle
	or centered on the bottom of the chart page. The default is “Center”.
COG TIME LINE	Is a line projected from the vessel icon which indicates the distance your vessel will travel
	at the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and infinite.

3.6INFORMATION PAGE

From Main Menu page it is possible to select an Information page containing Software,

Page 28 CP180 / CP180i