Graco M04xxx, M02xxx, M07xxx M12xxx 6, M18xxx 7.5 in. and M34xxx 7.5

Page 24

Mounting Hole Diagrams

4 in.

(102 mm)

	M12xxx (6 in.)
	Three 5/8-11
	tie rod holes
	5.906 in.
	(150 mm)
	bolt circle
	Two M8
	mounting holes
	2.0 in. (50 mm)
ti12738a	5.250 in.
	(133 mm)
	Four M8 X 1.25
	optional
	mounting holes
	ti12737a
	3.38 in. (86 mm)

Two M8 mounting holes

M18xxx (7.5 in.) and M34xxx (7.5 in.)

Three 5/8-11 tie rod holes

4 in.	5.906 in.
4 in.	(150 mm)
(102 mm)	(150 mm)
	bolt circle
	ti12740a
	3.1 in. (78 mm)
		5.250 in.
		(133 mm)
	Four M8 X 1.25
	optional
	mounting holes
	3.1 in. (78 mm)	ti12739a

24

312796R

Image 24

Contents Important Safety Instructions NXT Air MotorContents Related ManualsFire and Explosion Hazard Pressurized Equipment Hazard Models Uses a smaller muffler. Limited useComponent Identification Model M04LT0 shownM18xxx models have two mufflers C Bleed-type master air valve Air regulatorAir filter Troubleshooting Problem Cause SolutionRepair Replace Complete Air ValveReplace Seals or Rebuild Air Valve Disassemble the Air ValveAir valve assembly Air valve u-cup installation Reassemble the Air ValveDisconnect the Air Motor Coupling nut removalDisassemble the Air Motor Reassemble the Air MotorTie Bolt 13 mmAir motor u-cup installation Air Motor TorqueParts Air Motor Parts All Models Description Qty M02xxx M04xxx M07xxx M12xxx M18xxx M34xxxSOLENOID/REED Switch Air Valve Parts Air Valve AirValve Description Qty Repair Kit End Cap Kit OtherKits and Accessories Dimensions Air Motor Weight Model Inch mm Lb kg M02xxx M04xxx M07xxxMounting Hole Diagrams M02xxx 2.5 M04xxx 3.5M07xxx 4.5 M12xxx 6 M18xxx 7.5 in. and M34xxx 7.5Technical Data Graco Standard Warranty Graco Information