Graco 307212ZAC Technical Data, Category Data, 30-700 kPa, 0.3-7.0 bar

Page 22

Technical Data

Category

Data

Maximum Fluid Inlet Pressure	250 psi (1.8 MPa, 18 bar)

Regulated Fluid Pressure Range	Models 217314 & 221118: 20–160 psi (0.15–1.1 MPa, 1.5–11 bar)
	Models 214706, 214895, 244375, 255374, & 24A082: 5–100 psi
	(30–700 kPa, 0.3–7.0 bar)
	Model 214980: 0–30 psi (0–210 kPa, 0–2 bar)

Maximum Flow Capacity	3 gpm (11 liters/min) with 70 cps fluid at 200 psi (1.4 MPa, 14 bar)
	inbound pressure

Wetted Parts

Tungsten Carbide, Acetal Resins, PTFE, 304 & 316 Series Stain- less Steel, Nylon, PET.

Canadian Registration Number (CRN):

Alberta – 0C04874.52

Ontario – 0C4874.5R1

Models: 214895, 214706, 217314, 221118, and 214980

22 307212

Image 22

Contents Instructions-Parts List Important Safety InstructionsTable of Contents Spring Operated Fluid Regulators ModelsAir Operated Fluid Regulators 307212 Pressurized Equipment Hazard Spring Operated Installation InstallationPilot Regulator Air Supply Line Air Operated Installation Before Installing the Fluid Regulator Installing the Fluid RegulatorFlushing Procedure Pressure Relief ProcedureOperation Adjust the fluid regulator to the desired setting Regulating Fluid PressurePage Troubleshooting Problem Cause SolutionService Service of the Air Operated RegulatorsModels 214980 shown Air Bleed HoleService of the Spring Operated Regulators Models 217314 Models 214895, 214706, 255374, and 24A082Model 214706, Series H PartsModel 214895, Series H Without gauge. Includes items 1-26Model 255374, Series a Model 24A082, Series a Includes itemsWith gauge. Includes items 1-32 Model 217314, Series FModel 221118, Series E Without gauge. Includes items 1-26 21 *3Model 214980 Series F Includes items 2040Model 244375 Series B Dimensions Gauge Port30-700 kPa, 0.3-7.0 bar Technical DataCategory Data Model 214980 0-30 psi 0-210 kPa, 0-2 barPerformance Chart Graco Standard Warranty Graco Information