Yamaha PSR-E203, YPT-200 owner manual Precautions

Page 4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply/AC power adaptor

Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument.

Use the specified adaptor (PA-3B, PA-3C or an equivalent recommended by Yamaha) only. Using the wrong adaptor can result in damage to the instrument or overheating.

Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.

Do not place the AC adaptor cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.

Do not open

Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel.

Water warning

Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings.

Never insert or remove an electric plug with wet hands.

Fire warning

Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire.

If you notice any abnormality

If the AC adaptor cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the adaptor plug from the outlet, and have the instrument inspected by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following:

Power supply/AC power adaptor

When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord.

Unplug the AC power adaptor when not using the instrument, or during electrical storms.

Do not connect the instrument to an electrical outlet using a multiple- connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet.

Do not attempt to recharge batteries that are not intended to be charged.

When the batteries run out, or if the instrument is not to be used for a long time, remove the batteries from the instrument to prevent possible leakage of the battery fluid.

Keep batteries away from children.

If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is corrosive and may possibly cause loss of sight or chemical burns.

Battery

Always make sure all batteries are inserted in conformity with the +/- polarity markings. Failure to do so might result in overheating, fire, or battery fluid leakage.

Always replace all batteries at the same time. Do not use new batteries together with old ones. Also, do not mix battery types, such as alkaline batteries with manganese batteries, or batteries from different makers, or different types of batteries from the same maker, since this can cause overheating, fire, or battery fluid leakage.

Do not dispose of batteries in fire.

Location

Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.

Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.

Do not place the instrument in an unstable position where it might accidentally fall over.

(4)-9 1/2

4 PSR-E203/YPT-200 Owner’s Manual

Image 4
Contents Page Please Keep this Manual FCC Information U.S.A Precautions Copyright Notice Supplied Accessories Panel logosContents Setting Up Power RequirementsUsing an AC Power Adaptor Using BatteriesUsing the Midi Terminals Turn on the powerPanel Controls and Terminals Front Panel@0 @1 Changing the Voices Quick GuidePress the Voice button Select a VoiceFlute Play the keyboardPress the Voice button Select the desired Drum kit Press the Portable Grand buttonStd.Kit Try out each key Fun Sounds Press the Sound Effect KIT buttonPress the TEMPO/TAP button to display the tempo Set the metronome tempo by using the number buttons 0-9, +Tempo Set the time signature by using the number buttons 0-9, + Set the metronome volume by using the number buttons 0-9, +Press the Function button a number of times until MetroVol AppearsQuick Guide Press the Song button Select the desired Song by using the number buttons 0-9, +Press the START/STOP button Song List Select a Style Quick Guide Press the Style buttonHH Light Playing with a Style Turn Sync Start onPlay with a Style Quick Guide Basic Operation and Displays Basic OperationGrandPn2 Press a button to select a basic function003 Lesson 1 Listen & Learn Song LessonSelect the desired Song for your lesson Stop the Lesson mode No LPartSelect the part you want to practice Start LessonLesson 2 Timing GradeLesson 3 Waiting R3 WaitingSong Volume Song settingsChanging the Melody Voice Mute Set the Song Volume by pressing the number buttons 0- 9, +SongVol Repeat Practice Makes PerfectOFF Repeat Adding Reverb Play With a Variety of EffectsHall2 OFF Sustain Adding Panel SustainOn Sustain Handy Performance Features Setting the Split PointTranspose TransposTuning One Touch SettingTuning SprnoSaxAdjusting the Main Voice Parameters Changing the tempo of the Song/StyleStyle Auto Accompaniment Functions Various ways to start and stop Style playbackStopping Style playback Pattern Variation Sections Turn Sync Start onPress the MAIN/AUTO Fill button Press the INTRO/ENDING/rit. buttonSet the Style volume by using the number buttons 0-9, + Adjusting the Style VolumeStyleVol Easy Chords Playing Auto Accompaniment ChordsStandard Chords Recognized Standard Chords Chart Looking up Chords Using the Chord Dictionary DictAbout chords Set the value by using the number buttons 0-9, + Function SettingsSelect the item and change the value Function Setting List About Midi What is MIDI?What You Can Do With Midi Transferring Performance Data To and From Another Instrument Local Settings Midi settingsVoice List Maximum PolyphonyVoice List Drum Kit List MidiStyle List Style Style Name BeatEffect Type List Reverb TypesMidi Implementation Chart YamahaOmni Poly Midi Data Format Effect mapTroubleshooting Problem Possible Cause and SolutionSpecifications Panel ControlsIndex Panel Controls and TerminalsIndex Page Limited Warranty North America