PYLE Audio PYD-1002 Your Pyle PRO Series Performance Mixer, Input/Output Features PYD1002/1005

Your PYLE PRO Series Performance Mixer

is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording.

Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect years of trouble-free service from this product.

Owner’s Manual Table of Contents

i	Input/Output Features	8	Using the Crossfader
1	Features and Controls: PYD-1002	9	Using the Tone Controls
2	Features and Controls: PYD-1005		Using the Kill Frequency Switches (PYD-1005)
3	Presetting Controls Before Use		Using the Zone Level Control (PYD-1005)
	Connecting the Outputs	10	Using the Master Balance Control(PYD-1005)
	Playing the Mixer’s Output Signal		Using the Master Level Control
	Recording the Mixer’s Output Signal		Dual Meter Modes
	Monitoring the Mixer’s Output Signal in DJ Booth 11		Using the Punch Controls (PYD-1005)
	(PYD-1005)	12	Troubleshooting
4	Connecting the Mixer Inputs		Care and Maintenance
5	Connecting the Lamp	13	Specifications
6	Using Headphones		Warranty
	Using the Mixer Controls
8	Using the Microphone

Input/Output Features: PYD1002/1005

Output Jacks to connect the mixer to a receiver or amplifier – choose to use cables with either 1/4” jacks or RCA plugs.

Record Output Jacks to connect the mixer to a tape deck for recording the mixed program

Zone Output Jacks to connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location(PYD-1005)

Stereo Line Inputs let you connect most high-level audio sources, such as CD players, tape deck, tuner or VCR.

Ground Screw for turntables

MIC2 Microphone rear panel connector permits you to connect a balanced or unbalanced low impedance microphone with 1/4” plug.

PHONO Stereo Inputs for using a turntable with a magnetic cartridge

i – Pyle Pro Mixer Owner’s Manual