Samson PL1602 manual Specifications, Frequency Response Unity

Page 28

Specifications

1.	Frequency Response (Unity)	20 Hz to 20 kHz ± 1 dB
2.	THD+N (unity gain, 20 Hz - 20 kHz)	Less than 0.05 %
3.	Maximum Gain (Mic in to Main Mix out)	69 dB
4.	Crosstalk (Ch - to - Ch, 1 kHz)	-70 dB
5.	Residual Noise	-85 dB
6.	Headphone Output Level	100 mW (32 Ω loaded)
7.	Equalizer
	High	10 kHz ± 15 dB
	Low	100 Hz ± 15 dB
8.	Dimensions	19 in (w) x 9 (d) x 3.5 (h)
		482 mm (w) x 230 (d) x 88 (h)
9.	Weight	8.8 lbs • 4 kg

26

Image 28

Contents Page Introduction System Features Guided Tour Introduction System Features Guided Tour Overview SamsonGuided Tour Channels Guided Tour Main Section SamsonGuided Tour Main Section Guided Tour Rear Panel Samson Technologies CORP., NEW YORK, U.S.AGuided Tour Rear Panel Connecting The PL 1602 General Suggestions + Signal GroundSleeve TIP Ring TIP Return Ground Ring Send Setting Up and Using The PL Setting the Correct Gain Structure Setting the Correct Gain Structure Grounding Techniques Grounding Techniques Using the Balance Control Using Equalization Using Aux Sends and Returns Using Channel Inserts Application 1 Using The PL 1602 As a Main Live Mixer ApplicationsApplication 2 Using The PL 1602 As An Onstage Monitor Mixer Application 3 Using The PL 1602 As a Keyboard Submixer Application 4 Linking The PL 1602 With Other Mixers Block Diagram Appendix B Changing the PL 1602 Voltage Specifications Frequency Response Unity