Samson Setting Up the XP1000, Carefully hold the mixer to remove it from the speaker

Page 13

Setting Up the XP1000

Unpack all the system components from the shipping carton and save all packing materials in the event your unit ever needs to be returned for service.

Remove the mixer by turning the quarter turn screw counterclockwise towards the RELEASE position.

LOCK

RELEASE

Carefully hold the mixer to remove it from the speaker.

Remove the accessory compartment cover by turning the quarter turn screw counter- clockwise towards the RELEASE position, and remove the included speaker cables.

Replace the accessory panel by aligning the bottom of the panel with the slots. Make sure the quarter turn screw is in the RELEASE position; then close the panel and turn the quarter turn screw clockwise to LOCK.

XP1000 • Portable PA System

Image 13

Contents XP1000 Page Important Safety Information Accordance with the installation instructions FCC Notice Contents Introduction Features Channel Input Jacks channels 1 XP1000 Mixer LayoutEqualizer control knobs XP1000 Mixer Layout Pairing with a Bluetooth device Carefully hold the mixer to remove it from the speaker Setting Up the XP1000Position the speakers on the floor or on stands Quick Start XP1000 Quick Start Avoiding Feedback Applying EffectsWireless Stage XPD1 Wireless System OptionalStage XPD1 Wireless System Optional XP1000 Connections XLR Balanced Connector Wiring GuideDimensions and Weight SpecificationsBlock Diagram