Samson XP1000 owner manual Stage XPD1 Wireless System Optional

Page 18

Stage XPD1 Wireless System (Optional)

Plug the RXD1 USB receiver into the Channel 4 USB jack labeled

WIRELESS.

Turn the channel 4 LEVEL knob

on the XP1000 completely

counterclockwise to 0, then turn the POWER siwtch on the XP1000 to the ON position.

On the wireless handheld transmitter,

unscrew the bottom section of the microphone by turning it counterclockwise and then slide it off.

Place a fresh set of AA (LR6) batteries

in the transmitter battery holder, taking care to observe the polarity markings, then replace the cover.

Turn on the power to the transmitter by pressing and holding Power switch; the indicator LED will light amber.

18

Image 18
Contents XP1000 Page Important Safety Information Accordance with the installation instructions FCC Notice Contents Introduction Features XP1000 Mixer Layout Channel Input Jacks channels 1Equalizer control knobs XP1000 Mixer Layout Pairing with a Bluetooth device Setting Up the XP1000 Carefully hold the mixer to remove it from the speakerPosition the speakers on the floor or on stands Quick Start XP1000 Quick Start Applying Effects Avoiding FeedbackStage XPD1 Wireless System Optional WirelessStage XPD1 Wireless System Optional XP1000 Connections Wiring Guide XLR Balanced ConnectorSpecifications Dimensions and WeightBlock Diagram