Loop Delay

The Loop Delay type is used to create an infinite stereo delay loop up to 20 seconds long. Once a loop is created, you can add overdub parts to it.

To use the Loop type, do the following:

1.Select LOOP using the Type knob.

2.Press and hold the Foot Switch.The Indicator LED begins flashing RED indicating the Loop is ready to begin recording.

3.While still holding down the Foot Switch, begin playing your instrument. The Indicator LED lights solid RED indicating the pedal is recording.

4.When you reach the end of your passage, release the Foot Switch.The Indicator LED lights solid GREEN and the passage you recorded plays back in an infinite loop.

5.To add overdubs, press and hold the Foot Switch at any time and begin playing.The Indicator LED lights solid YELLOW as long as the Foot