DigiTech DL-8 manual Tails Switch

Page 16

Tails Switch

The HardWire Delay/Looper features a switch that allows the delay repeats to continue being heard after the effect is bypassed. When the Tails Switch is set ON, the HardWire Delay/Looper does not utilize true hardwire bypass. If you always want to use true hardwire bypass, set the Tails Switch to OFF.

When the Tails Switch is OFF, delay repeats are cut off immediately when the effect is bypassed.

The Tails Switch is located under the pedal Foot Switch and is accessed by pressing in one of the Foot Switch Release Pins using the tip of a 1/4" guitar cable plug. Once the Foot Switch is removed, the switch is visible inside the chassis next to the button that turns the effect on and off. Slide the switch to the left to turn Tails ON and to the right to turn Tails OFF.

12

Image 16
Contents Page Declaration of Conformity Warranty Page Introduction Included ItemsPage Time Knob Controls the amount of delay time specified by What Does This Do?Page Page Page Page Tap Tempo Delay Page Loop Delay Page Tails Switch Page Amplifier Setup Effects Setup Battery Operation Foot Switch HardWire Performance Accessories Hook-and-loop Pedalboard Pad Foot Switch Glow Sticker StompLock Specifications 22 PS200R-240 240V~ 50Hz