JBL Synthesis owner manual Woofer Equalization, Bass EQ

Page 10

2.1.5 Woofer Equalization

BASS EQ

While the JBL Synthesis System is calibrated to provide awesome amounts of clear, clean bass, some listeners might prefer a touch more bass for some sources. This cannot be adjusted from the Remote Controller, but must be done using the BASS EQ dial to the left of the INPUT control on the Surround Processor.

The preset bass is encoded at the off or zero position. To boost the bass level, slowly turn the dial clockwise a little at a time until it meets your auditory needs. A full 17 db of boost is available, so go slow to avoid shocking the equipment or your ears.

Image 10

Contents Manual System Installed for On Long Island callContents Basic Operations Powering UpBasic Remote Control Operations Selecting Source DevicesBasic Adjusting the Master VolumeAdjusting the Cinema Volume Basic Cinema OperationsBasic Music Operations Adjusting the Music VolumeAdjusting the Music Balance Link Forward See Advanced OperationsTurning the System Off Advanced Cinema Operations Ambience Level AdjustmentAdvanced Operations Link Back See ,Advanced Panorama AdjustmentSetting Time Delay Center Speaker LevelWoofer Equalization Bass EQSibilant Filter To activate this feature, press the button markedHi Freq. EQ 70mm Cinema ModesTo activate this mode, press the button marked 35 MM Movie THX DolbySwitching to the Music System Advanced Music OperationsRock Music ModesTo engage this mode, simply press the POP button To engage this mode, simply press the Jazz button Hall JazzTo engage this mode, simply press the Hall 1 button Advanced Remote Control Operations Mute Front Panel Controls Input Level Knob Bass EQ KnobSERVICE3.0 ServiceGeneral Service Policy Audio ServiceTemplates Date Owner InstallerCalibration Synthesis OneCalibration TEMPLATES4.0 Synthesis Two