JBL Synthesis owner manual Turning the System Off

Page 7

BASIC

OPERATIONS1.0

1.5 Turning the System Off

There is no preferred order of components when turning the system off. However, there is one caution you should follow:

NOTE: Do not turn the system off while any Source Device is running and producing sound. Always make sure all Source Devices are in “Idle” before pressing the main POWER button.

Failure to do this can produce a noticeable “pop”, and can, over time, damage your components. If you need to turn off the sound to the system suddenly, for example, to take a phone call or to reply to someone, press the MUTE button.

Notes

Image 7

Contents Manual On Long Island call System Installed forContents Selecting Source Devices Powering UpBasic Remote Control Operations Basic OperationsBasic Cinema Operations Adjusting the Master VolumeAdjusting the Cinema Volume BasicLink Forward See Advanced Operations Adjusting the Music VolumeAdjusting the Music Balance Basic Music OperationsTurning the System Off Link Back See , Ambience Level AdjustmentAdvanced Operations Advanced Cinema OperationsCenter Speaker Level Panorama AdjustmentSetting Time Delay AdvancedBass EQ Woofer EqualizationSibilant Filter To activate this feature, press the button markedHi Freq. EQ 70mm Cinema ModesTo activate this mode, press the button marked 35 MM Movie Dolby THXAdvanced Music Operations Switching to the Music SystemRock Music ModesTo engage this mode, simply press the POP button To engage this mode, simply press the Jazz button Hall JazzTo engage this mode, simply press the Hall 1 button Advanced Remote Control Operations Mute Input Level Knob Bass EQ Knob Front Panel ControlsAudio Service ServiceGeneral Service Policy SERVICE3.0Synthesis One Date Owner InstallerCalibration TemplatesSynthesis Two Calibration TEMPLATES4.0