JBL Synthesis owner manual Basic Cinema Operations, Adjusting the Master Volume

Page 5

BASIC

OPERATIONS1.0

1.2.2 Adjusting the Master Volume

The Master Volume buttons at the top right hand part of the Remote Controller are used to adjust the Output Levels of the system. Press the button to make things Louder, and the button to make things Softer. These do not adjust the Input Levels of the Source Devices. In fact, we recommend that you do not do so. They have been set and calibrated to mesh flawlessly with the system, and adjusting them directly — either through the dials on their front panels or via their own separate Source Remote Controllers, can throw the system out of balance.

NOTE: If, over time, you notice that one Source Device consistently sounds Too Loud or Too Soft, call your Certified Dealer. He or she will adjust the levels and re–set the new levels as your “Reference Levels” to which you can return if the system’s sound goes awry.

1.3 Basic Cinema Operations

1.3.1 Adjusting the Cinema Volume

To adjust the Volume in Cinema Mode, make sure that the Video is powered up and that it has been selected as the source. Then simply adjust the volume or using the MASTER VOLUME buttons.

5

Image 5
Contents Manual On Long Island call System Installed forContents Basic Remote Control Operations Powering UpBasic Operations Selecting Source DevicesAdjusting the Cinema Volume Adjusting the Master VolumeBasic Basic Cinema OperationsAdjusting the Music Balance Adjusting the Music VolumeBasic Music Operations Link Forward See Advanced OperationsTurning the System Off Advanced Operations Ambience Level AdjustmentAdvanced Cinema Operations Link Back See ,Setting Time Delay Panorama AdjustmentAdvanced Center Speaker LevelBass EQ Woofer EqualizationHi Freq. EQ To activate this feature, press the button markedSibilant Filter To activate this mode, press the button marked 35 MM Movie Cinema Modes70mm Dolby THXAdvanced Music Operations Switching to the Music SystemTo engage this mode, simply press the POP button Music ModesRock To engage this mode, simply press the Hall 1 button JazzTo engage this mode, simply press the Jazz button Hall Advanced Remote Control Operations Mute Input Level Knob Bass EQ Knob Front Panel ControlsGeneral Service Policy ServiceSERVICE3.0 Audio ServiceCalibration Date Owner InstallerTemplates Synthesis OneSynthesis Two Calibration TEMPLATES4.0