LED DISPLAY | EFFECTS |
The LED display shows information | The EFFECTS function adds chorus, delay, |
about selected sounds, functions, | tremolo, and rotary speaker simulation effects to |
and other important settings. | the sound. (page 23) |
METRONOME
The METRONOME function provides a steady rhythm with which to aid piano practice. The tempo, time signature, and volume of the metronome can be freely adjusted. (page 28)
Page
11
VALUE/BALANCE
T h e a n d VA L U E / BALANCE buttons are used to adjust various settings and functions.
REVERB
The REVERB function adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall. (page 22)
RECORDER
The RECORDER function allows two track songs to be recorded and stored to one of the 4 different song memories, and later played back or altered. (page 30)
TOUCH
The TOUCH function allows the touch sensitivity of the EP3 digital piano’s keyboard to be adjusted. (page 25)
TRANSPOSE
The TRANSPOSE function allows the audible pitch of the EP3 digital piano to be raised or lowered in half steps. (page 26)
FUNCTION
T h e F U N C T I O N mode allows various advanced parameters s u c h a s t u n i n g , temperament, MIDI operation, and other settings, to be adjusted. (page 36)
INTRODUCTION
1
POWER BUTTON
The POWER BUTTON is used to turn the EP3 digital piano on and off. Be sure to turn off the instrument after playing. (page 13)
PHONES
The PHONES jacks located on the left and right side of the EP3 digital piano, are used to connect stereo headphones to the instr ument . Two pairs of headphones can be connected and used simultaneously.