Page
59
NOTES ON USB USAGE
When both MIDI jacks and the USB port are connected simultaneously, the USB port has priority.
When connecting a USB cable to the EP3 digital piano, first connect the USB cable and then turn the EP3 digital piano power on.
When connected the EP3 digital piano to a computer via the USB port, there may be a short delay before MIDI communications begin.
If the EP3 digital piano is connected to the computer via a USB hub and the USB communication becomes unreliable/unstable, please connect the USB cable directly to the USB port of the computer.
Turning on/off the power of the EP3 digital piano while connected via USB, or disconnecting the USB cable suddenly, may cause computer instability in the following situations:
while installing the USB driver while starting up the computer
while MIDI applications are performing tasks
while the EP3 digital piano is communicating with the computer while the computer is in energy saver mode
If there are any further problems experienced with USB communication while the EP3 digital piano is connected, please consult the instruction manual of your computer and
The
The USB logo can be used only for products approved by the
Forum Inc.) test.
“MIDI” is a registered trademark of the Association of Manufacturers of Electronic Instruments (AMEI). “Windows” is registered trademark of Microsoft Corporation.
“Macintosh” is registered trademark of Apple Computer, Inc.
Other company names and product names mentioned referenced herein may be registered trademarks or trademarks of respective owners.
APPENDICES
5