Kawai EP3 manual Press the PLAY/STOP button to ﬁnish recording

Page 32

Page

32

Step 2

Release the REC button.

The LED indicators for the selected PIANO and BASS buttons will stop ﬂashing, and the LED indicator for the REC button will start to ﬂash. This is the standby state for recording.

3 RECORDER SONG

The LED indicator for the SOUND SELECTION button will also turn on, indicating that the sound to be used for recording can be changed.

Step 3

Play the piano.

The recorder will automatically start recording with the ﬁrst key played.

The LED indicators for the PLAY/STOP and REC buttons will turn on.

Any changes made to the sound while recording will also be recorded.

While recording PART2, the previously recorded PART1 will also be played.

The recording can also be started by pressing the PLAY/STOP button instead of pressing a key, allowing PART2 to be recorded later in the song.

Step 4

Press the PLAY/STOP button to ﬁnish recording.

The LED indicators for the REC and PLAY/STOP buttons will turn off.

Saving may take a few moments. During this time, the EP3 digital piano will not respond to any other operations.

The total recording capacity of the EP3 piano’s memory is approximately 15,000 notes, with button and pedal presses also counted as one note. When the maximum capacity is reached, recording will stop and all music recorded up until that point will be saved to memory automatically.

Image 32

Contents Introduction Page Table of Contents Important Safety Instructions Product should be connected to Product is handled incorrectly Instruction for AC power cord U.K Package Contents IntroductionFeature Highlights Advanced Hammer Action IV-FVolume Split Sound Selection Buttons Part Names and FunctionsVALUE/BALANCE Connecting the F-10H Foot Pedal Getting StartedAttaching the Music Rest Turning the Speaker Output ON/OFFPress the Power button to turn on the power Adjust the volume level using the Volume sliderPlay the piano Basic OperationSelecting a Sound Press the E.PIANO buttonPress the Demo button to activate demo mode Demo SongsPress the Demo button to deactivate demo mode Dual Mode Step Split Mode Press the Split buttonPress the Split button to deactivate split mode Press the Organ button three timesFour Hands Mode Press the Split button again to deactivate Four Hands modeREVERB, EFFECTS, and EQ ReverbPress the Effects button again to deactivate the effects EffectsPress the Tempo button to exit EQ setting mode Line OUT EQTouch Curve Press the Touch buttonTranspose Voicing Press the Voicing buttonMetronome Press the Tempo buttonPress the Tempo button again to deactivate the metronome Press the Beat buttonPress the Tempo and Beat buttons simultaneously Adjusting the Metronome VolumePress the Beat button again to deactivate the metronome Recording a Song Release the REC buttonPress the PLAY/STOP button to stop recording Recording a Second PartPress the PLAY/STOP button to ﬁnish recording Press the PLAY/STOP button to stop song playback Playing Back a SongRelease the PLAY/STOP button Playing Back Parts Separately Erasing ALL Songs Erasing a SONG/PARTPress and hold the PLAY/STOP and REC buttons Function Settings Selecting & Adjusting a FunctionBrilliance Tuning Damper Effect String Resonance Temperament Brief Explanation of TemperamentsKEY Signature of Temperament Lower Octave Shift Damper Hold ON/OFF Midi Functions Midi OverviewEP3 Midi functions Midi Channel Send Program Change Number Local Control ON/OFF Transmit Program Change ON/OFF Midi reception onlyTouch curve setting Key of Temperament setting Step MULTI-TIMBRAL Mode ON/OFF Step Channel Mute Lower Pedal ON/OFF Memory Backup Connecting to Other Devices AppendicesUSB Usage About the USB DriverAppendices Rhythm Style List Drum KIT Sounds Specifications Function Transmitted Recognised Remarks Page Page KPSZ-0244 OW1023E-S0806 Version.1