Kawai CN21 manual Function Mode

Page

24

5. FUNCTION MODE

The Function Mode provides access to many other useful features of the CN21 piano.

1) BASIC OPERATIONS

…Step 1

Press and hold the METRONOME and SOUND SELECT buttons at the same time, then press one of the 15 lowest keys assigned to the desired function.

The LED indicators for the METRONOME and SOUND SELECT buttons will start to flash while the settings are

made.

„If the LED indicators for either the CONCERT MAGIC or LESSON buttons are turned on, the Function Mode cannot be used.

…Step 2

While still holding down the METRONOME and SOUND SELECT buttons, press the '- (off)' or '+ (on)' keys to change the value for the selected function.

	MODE
5	FUNCTION

Hold down the button.

„W h i l e h o l d i n g d o w n t h e METRONOME and SOUND SELECT buttons, it is possible to select other functions, changing each value successively.

- +	1 2 3 4 5 6 7 8 9 0
off on
	number keys

Use the enclosed 'function label' (page 8) for your convenience.

1	2	3	4
TOUCH	TRANSPOSE	TUNING	REVERB

5	6	7	8	9
CONCERT MAGIC MODE	MIDI CHANNEL SELECT	MIDI LOCAL CONTROL	MULTI TIMBRAL MODEON/OFF	TRANSMIT MIDI PROGRAM

…Step 3

Release both the METRONOME and SOUND SELECT buttons to exit Function Mode.

„When the power is turned off, Function Mode settings will be reset to the factory default values, shown below.

Function	Default
TOUCH	Normal
TRANSPOSE	0
TUNING	A4=440.0Hz
REVERB	On
CONCERT MAGIC MODE	Mode 1
MIDI CHANNEL SELECT	1ch
MIDI LOCAL CONTROL ON/OFF	On
MULTI TIMBRAL MODE ON/OFF	Off
TRANSMIT MIDI PROGRAM CHANGE	On

CHANGE

MIDI settings