Page
32
2) ASSEMBLY INSTRUCTIONS
Caution y Ensure that this section is read thoroughly before attempting to assemble the CN21 piano, and that two or more people work on unit assembly.
yWhen moving the CN21 piano, ensure that hands are not caught in the unit, and that the piano is not dropped on an individual’s feet.
Before attempting to assemble the CN21 piano, ensure that all parts are included.
A
PARTS PROVIDED |
|
Side Panel (A) | 2pcs. |
Back Panel (B) | 1 pc. |
Pedal Board (C) | 1 pc. |
Screw (D) | 2 pcs. |
Screw (E) | 4 pcs. |
Bolt (F) | 4 pcs. |
Bolt (with plain washers and |
|
spring washers) (F') | 4 pcs. |
Adjuster (G) | 1 pc. |
Headphone hook set |
|
x Headphone hook | 1 pc. |
x Tapping screw | 2 pcs. |
ASSEMBLY SEQUENCE
1.Insert the Adjuster (G) on the bottom of Pedal Board (C). Untie the connection cord from the Pedal Board and pull it out.
Fasten Side Panel (A) and Pedal Board (C) with four bolts (F). Ensure that the bolts are fastened tightly.
Use the correct side panel for the left side and the right side of the unit.
Ensure that the pedal cable is not caught between the assembled parts.
Bolt (F) | Bolt (F') | Screw (D) |
M6 ° 25 | M6 ° 25 | 4 ° 30 |
Screw (E) | Adjuster (G) |
4 ° 20 |
|
(G)
(F')
(A)
(C)
Arrow
6 | APPENDICES |
|
Pedal support insert hole (back of the pedal board)
2.Fasten Side Panel (A) and Back Panel (B) with two screws (D). Then fix Back Panel (B) to Pedal Board (C) with four screws
(E).
(A)
(D)
(C)
(E)
(B)