Page
37
10) TRANSPOSE
The transpose function allows the key of the CA111 piano to be raised or lowered in half steps. This is particularly useful when accompanying instruments with different sounds, or when a song learned in one key must be played in another key.
Step 1
Press the Menu button repeatedly, or press and hold the Menu button then press the Sor TValue buttons, until the Transpose function is selected.
OR
10.Transpose = 0
Step 2
The LED indicator for the Menu button will turn on.
The Transpose menu function will be shown in the LCD display.
The current transpose setting will be shown on the second line of the LCD display.
Press the S or TValue buttons to set the desired transpose value.
The ‘C’ key in the centre of the piano keyboard corresponds to the value ‘0’.
The piano pitch can be transposed by up to 12 halftones higher or 12 halftones lower.
Step 3
Play the piano.
Step 4
The transpose value set in Step 2 will be applied to the sound.
MENU FUNCTIONS
7
Press the Sound button to exit the Transpose menu.
The LED indicator for the Menu button will turn off.
The selected sound will be shown in the LCD display.
Alternatively, press the Menu button again to select other menu functions.
The Transpose function will return to the default setting of ‘0’ when the S and TValue buttons are pressed simultaneously, or when the power is turned off.
The User Memory function can be used to store the desired Transpose setting, allowing the preferred Transpose setting to remain selected even after the power is turned off. Please refer to the instructions on page 43 - 14) USER MEMORY - for more information.