Kawai CA 111 manual Do not stand on the product or exert excessive force

Page 6

Page

6

Indicates a potential hazard that could result in injury CAUTION or damage to the product or other property if the

product is handled incorrectly.

Do not use the product in the following areas.

Areas, such as those near windows, where the product is exposed to direct sunlight

Extremely hot areas, such as near a heater

Extremely cold areas, such as outside

Extremely humid areas

Areas where a large amount of sand or dust is present

Areas where the product is exposed to excessive vibrations

Using the product in such areas may result in product breakdown.

Use the product only in moderate climates (not in tropical climates).

When closing the fallboard, close it gently.

Before connecting cords, make sure that the power to this product

and other devices is turned OFF.

Take care not to allow any foreign matter to enter the product.

Closing it roughly may trap your fingers, resulting in injury.

OFF

Failure to do so may cause breakdown of this

 

product and other devices.

Entry of water, needles or hair pins may result in breakdown or short-circuit.

The product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.

Do not drag the product on the floor.

Take care not to drop the product.

Do not place the product near electrical appliances such as TVs and radios.

When connecting the AC power cord and other cords, take care

not to entangle them.

Do not wipe the product with benzene or thinner.

Please lift up the product when moving it. Please note that the product is heavy and must be carried by more than two persons. Dropping the product may result in breakdown.

Doing so may cause the product to generate noise.

If the product generates noise, move the product sufficiently away from the electrical appliance or connect it to another AC outlet.

Failure to do so may damage them, resulting in fire, electric shock or short-circuit.

Doing so may result in discoloration or deformation of the product.

When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product.

Do not stand on the product or exert excessive force.

Doing so may cause the product to become deformed or fall over, resulting in breakdown or injury.

Do not place naked flame, such as lighted candles on the product.

Doing so may cause the illumination to fall over, resulting in fire.

Image 6
Contents Part Names Functions Page Table of Contents Important Safety Instructions Product should be connected to Do not stand on the product or exert excessive force Instruction for AC power cord U.K Part Names & Functions ‘ Control BOXUsed to indicate that the control panel is turned on Plug the CA111 power plug into the electric wall outlet Basic Operation‘ Performing with Headphones Play the pianoSingle Sound Mode Internal SoundsDual Mode Press the Dual button again to deactivate Dual modeReverb Press the Reverb button to activate the reverb simulationPress the EQ button to activate the EQ mode Press the EQ button once again to deactivate the EQ‘ Adjusting the Metronome Tempo Press the Metronome button to activate the metronome‘ Activating the Metronome ‘ Adjusting the Metronome Volume ‘ Changing the Metronome Time Signature‘ Deactivating the Metronome Recording a Song Select the desired sound for the performancePress the Rec button to activate the recorder Press the Play/Stop button to stop recording Playing Back a Song Press the Play/Stop button to activate playback modePress the Sound button to deactivate playback mode Press the Play/Stop button once again to stop playbackPress the Play/Stop and Rec buttons simultaneously Press the Sound button to deactivate delete modeDeleting a Song Press the Rec button to delete the selected songDemo Mode ‘ List of Demonstration Pieces‘ Listening to Demonstration Pieces Press the EQ and Menu buttons simultaneouslyMenu Functions ‘ Menu Function ListPress the Menu button to select the Dual Balance function Press the Dual button to activate Dual modeDual Balance Press the Sound button to exit the Dual Balance menuVoicing Press the Sound button to exit the Voicing menuPlay the piano while using the damper pedal Damper ResonancePress the Sound button to exit the Damper Resonance menu String Resonance Press the Sound button to exit the String Resonance menuG B F G C G C E G C D E G C KEY OFF Effect Press the Sound button to exit the Key Off Effect menuTouch Press the Sound button to exit the Touch menuTemperament Press the Sound button to exit the Temperament menu Temperament = EqualP.only ÇÈ S T Value buttonKEY of Temperament Press the Sound button to exit the Key of Temperament menuTuning Press the Sound button to exit the Tuning menuStretch Tuning Press the Sound button to exit the Stretch Tuning menuTranspose Press the Sound button to exit the Transpose menuMidi Channel ‘ Midi Overview¡ Midi Examples Press the Sound button to exit the Midi Channel menu „ Midi Program Change numbersLocal Control Press the Sound button to exit the Local Control menuMetronome Volume User Memory Press the Rec button to confirm saving of the user memoryFactory Reset Press the Rec button to restore the default factory settings‘ about the USB Connector ‘ about the USB Driver‘ Notes on USB Usage ‘ Specifications AppendixFunction Transmitted Recognised Remarks Page KPSZ-0234 OM1015E-S0804 Version.1