Casio GZ-500 Operation, Setting UP the Keyboard, Setting Setting operation, Initial settings

OPERATION

SETTING UP THE KEYBOARD

Item	Setting		Setting operation
System Reset	1*	1. Press the control button and repeat it until the display
			shows "Srt".
			"SUr" and "Srt" will appear alternately on the display.
		2.	Press the + key.
Assignable Jack	Sustain pedal	1.	Press the control button and repeat it until the display
			shows "JAC".
		2.	Using the +/- key, select "SUS" on the dispaly.

Sostenuto pedal

1.Press the control button and repeat it until the display shows "JAC".

2.Using the +/- key, select "SoS" on the dispaly.

	Soft pedal	1. Press the control button and repeat it until the display
			shows "JAC".
		2.	Using the +/- key, select "SFt" on the dispaly.
GM Reset 3*	2*	1.	Press the MIDI button and repeat it until the display shows
			"Grt".
			"SUr" and "Grt" will appear alternately on the display.
		2.	Press the + key.
		3.	Press the + key again.

Notes: 1* See the initial settings list as shown below.

2* See the initial settings in The General MIDI system on next page.

3* The exclusive message of "GM system on" will be tramsmitted when completing the operation.

System exclusive:	GM system on		[F0][7E][7F][09][01][F7]
The initial settings
Tone:	000 (Piano)		Channel 1 - 9 & 11 - 16
	dr0 (Drum set 0)		Channel 10
Modulation:	0	(Off)
MIDI control change
Volume:	100
Pan:	64 (Center)
Expression:	127 (Maximum)
Effect depth:	127 (Maximum)
Pitch bend sense:	2
Coarse tune:	0	(Center)
Fine tuning:	0	(Center)
Digital effect:	E-0 (Digital effect 0)
MIDI channel:	01
Channel On/Off:	On
Octave shift:	0
Modulation depth:	064
Touch response:	r-0 (Touch curve 0)
Velocity at touch
response OFF:	100
Assignable jack:	SUS (Sustain pedal)
Local control On/Off:	On

— 3 —