OTHERS
TROUBLESHOOTING
Incorrect operations can be mistaken as malfunctions. If you believe the unit is not operating correctly, consult the chart below. Sometimes incorrect operation may be due to a malfunction in another component. If the problem is not fixed, check the other components used with the player. If the problem still persists, contact your nearest Pioneer authorized service center or dealer for service.
Symptom |
| Cause |
| Remedy |
|
|
| ||
Disc doesn’t eject even when EJECT button (0) is | ÷ Power plug is disconnected from outlet. | ÷ Connect plug to wall outlet. | ||
pressed. | ÷ | The EJECT UNLOCK/LOCK button is set to the [LOCK] | ÷ Go to pause mode or cue standby mode before pressing the EJECT | |
|
| position. |
| button (0). |
|
|
| ÷ Set the EJECT UNLOCK/LOCK button to the [UNLOCK] posi- | |
|
|
|
| tion before pressing the EJECT button (0). |
|
|
|
| |
Play doesn’t commence even when the disc is in- | ÷ The auto cue function is set to on. | ÷ | Hold down the TIME MODE/AUTO CUE button for 1 second | |
serted. |
|
|
| or longer to turn off the A. CUE function. |
|
|
| ||
Playback immediately stops when started. During | ÷ Disc is loaded upside down. | ÷ Load the disc correctly with the label side UP. | ||
playback, the player pauses or stops. | ÷ Smudges on the disc, etc. | ÷ Clean the smudges from the disc and then play it again. | ||
|
|
| ||
No sound is audible. | ÷ Output cables are connected incorrectly or are loose. | ÷ Recheck connections. Refer to installation instructions. | ||
| ÷ Incorrect operation of audio mixer. | ÷ Check the settings of the audio mixer switches and sound volume | ||
|
|
|
| controls. |
| ÷ Pin plugs and/or amplifier terminals are dirty. | ÷ | Clean away dirt. | |
| ÷ Player is in pause mode. | ÷ Press the PLAY/PAUSE button (6). | ||
|
|
|
| |
Sound is distorted, noise is output. | ÷ | Incorrect connections. | ÷ Connect to audio mixer's LINE INPUT terminals. (Do not con- | |
|
|
|
| nect to MIC terminals.) |
| ÷ Pin plugs and/or amplifier terminals are dirty. | ÷ | Clean away dirt. | |
| ÷ Interference is being picked up from a TV set. | ÷ Switch OFF TV set, move player away from TV set or plug the player | ||
|
|
|
| into a separate outlet. |
|
|
|
| |
With certain discs, loud noise is produced or play | ÷ Disc has a bad scratch or warp. | ÷ | Replace disc. | |
stops. | ÷ Disc is extremely dirty. | ÷ | Clean disc. | |
|
|
| ||
When the auto cue function is set ON, track search | ÷ If the sound muted portion between selections is long, search- | ÷ Press TIME MODE/AUTO CUE button for more than 1 second | ||
is not finished. |
| ing time will be long. |
| to set the auto cue function OFF. |
| ÷ If the sound muted portion is recorded for about 10 seconds |
|
| |
|
| or more, playback will start without the auto cue function. |
|
|
|
|
|
| |
Back cue function cannot be carried out even | ÷ The Cue point is not set yet. | ÷ | Set the Cue point. (See page 12.) | |
though the CUE button is pressed in playback | ÷ | The DIGITAL OUT mode switch is set to the [NORMAL] position. | ÷ | The DIGITAL OUT mode switch is set to the [DJ] position. |
mode. |
|
|
|
|
|
|
| ||
Pressing the LOOP OUT button does not start loop | ÷ No Cue points (start points) have been set. | ÷ Set a Cue point. | ||
play. | ÷ | The DIGITAL OUT mode switch is set to the [NORMAL] position. | ÷ | The DIGITAL OUT mode switch is set to the [DJ] position. |
|
|
|
|
|
The Jog dial does not operate. | ÷ | The DIGITAL OUT mode switch is set to the [NORMAL] position. | ÷ | The DIGITAL OUT mode switch is set to the [DJ] position. |
The Jog dial does not operate as desired. | ÷ | Incorrect JOG MODE [VINYL/CDJ] is set. | ÷ | Press the JOG MODE SELECT button to set the desired JOG |
|
|
|
| MODE [VINYL or CDJ]. |
|
|
|
|
|
DJ functions do not work. | ÷ | The DIGITAL OUT mode switch is set to the [NORMAL] position. | ÷ | The DIGITAL OUT mode switch is set to the [DJ] position. |
|
|
| ||
The picture of the TV screen is fluctuated or FM | ÷ Interference is being picked up from the CD player. | ÷ Turn off POWER switch of the player, or move the player away | ||
broadcast is interfered with noise. |
|
|
| from the TV or tuner. |
The disc is not rotating when power is ON. | ÷ The disc rotation stops automatically if no operation has been | ÷ Playback can be started by pressing the PLAY/PAUSE button | ||
|
| performed for 80 minutes or more in pause mode |
| (6). Press the EJECT button (0) to eject the disc. |
| ÷ When the last track on the disc is over the disc stops rotating. |
|
| |
|
|
|
|
|
¶Static electricity and other external effects may cause this unit to malfunction. In this case, set the POWER switch to OFF, then switch it on again after the disc has come to a complete stop.
¶This unit cannot playback unfinalized (partial discs)
¶This component is designed to play 12cm discs and 8cm discs with a commercially available adaptor, eccentrically shaped discs cannot be played since damage or malfunc- tion may result.
¶When using an 8cm disc with an adaptor, compared to a 12cm disc, the speed may be slower in the scratch and reverse modes etc. This component rotates at a very high speed to generate high performance, however, in the interest of safety, the speed is lowered when an 8cm disc and adaptor are used. This is NOT a malfunction.
¶The BPM value measured by the
¶When using
About Data Recorded on MultiMedia Cards (MMC)
Users are responsible for preserving the data on their MultiMedia Cards; it is recommended that users make periodic backups of all important data stored on their cards.
It is not the responsibility of PIONEER if the component or MMC malfunctions due to outside interference of static electricity etc. and if data on the MMC is damaged or lost or incidental damage occurs no indemnification will be made.
18
<DRB1339>
En