9Other connections
| Pioneer flat |
| To control | |
| screen TV |
|
| output |
|
|
|
| |
|
|
| COMPONENT PR | |
|
|
| VIDEO |
|
|
|
| VIDEO | PB |
|
|
|
| |
OPTICAL |
| IN |
| Y |
LINE 1 |
|
|
| |
MCACC |
|
|
| |
DIGITAL IN |
|
|
| |
SETUP MIC | CONTROL | VIDEO OUT |
| |
|
| |||
Important
•With an SR+ cable connected, the remote must now be pointed towards your flat screen TV rather than the remote sensor of this unit in order to control this system.
•Use a
through a media receiver to the CONTROL OUT jack of your flat screen TV.1
Before you can use the extra SR+ features, you need to make a few settings in the unit. See SR+ Setup for Pioneer Flat Screen TVs below for detailed instructions.
SR+ Setup for Pioneer Flat Screen TVs
Make the following settings if you have connected a Pioneer flat screen TV to this unit using an SR+ cable. Note that the number of video inputs available will depend on the flat screen TV you’ve connected.
1Press SHIFT+SR+ on the remote.
2Use the / to select SETUP, then press ENTER.
3Use / to select the setting you want.
•VOL.C OFF – This unit does not control the volume of the flat screen TV.
•VOL.C ON – When this unit is switched to one of the inputs that use the flat screen TV (DVD, or another one of functions below), the volume on the flat screen TV is muted so only sound from this system is heard.
4Assign any input source connected to the flat screen TV to the corresponding input
number.
Use / to select the source (DVD, LN1/2 (LINE 1/2) or USB), then / to select the input number.
This matches this unit’s input source with a numbered video input on the flat screen TV.2 For example, select the LN1 PDP3 or LN2 PDP3 setting if the video output of your line component is connected to video input 3 on the flat screen TV. TVTN switches the flat screen TV to its
5 When you’re finished, press ENTER.
Switching on the SR+ mode
1Press SHIFT+SR+ on the remote.
2Use / to select SR+ ON then press
ENTER.
To switch SR+ control off, select SR+ OFF.
•If you disconnect the SR+ cable or switch the flat screen TV off while SR+ is on, the SR+ ON setting remains.
•The SR+ setting is maintained even after switching this system into standby then back on. Automatic muting will be effective when this system is switched on.
Note
1You won’t be able to use the remote sensor of this unit with the CONTROL IN jack of this unit connected to the CONTROL OUT jack of your flat screen TV. You can use the remote sensor of the flat screen TV (even in standby) as long as the power isn’t switched off.
2 The PDP5 input may be called ‘PC Input’ (or similar) on your flat screen TV.
36
En