Operating Instructions, Earpad Cleaning

OPERATING INSTRUCTIONS

1.Install two (2) AA alkaline or NiMH rechargeable batteries. If you’re using rechargeable batteries, they must be charged before using.

2.Plug the earphone into the “EAR” jack on the top of the unit.

3.Turn the receiver on by rotating the volume control knob clockwise. The receiver’s ON indicator should illuminate green.

4.Adjust the volume for your comfort.

5.To turn the receiver off, rotate the volume control knob counter-clockwise until it clicks off. The receivers’ ON indicator should go dark.

Note: To maximize battery life, turn the receiver off when it’s not in use.

DISCLAIMER: FCC RULES LIMIT USE OF THIS EQUIPMENT TO AUDITORY ASSISTANCE.

EARPAD CLEANING

Do not immerse the earphone in water or other cleaning agent. Foam pads may be removed and washed with a mild laundry soap solution, rinsed thoroughly, and air-dried. Foam pads may also be replaced with new pads.

BATTERY INFORMATION
Alkaline batteries (BAT 001):	100 hours
Rechargeable NiMH batteries (BAT 026):	50 hours per charge

Batteries from other suppliers may provide different operating life.

NOTE: The ON indicator will illuminate RED to indicate a low battery