Tascam FW-1884 owner manual Important Safety Precautions, Important for U.K. Customers, For Canada

Page 2

Important Safety Precautions

IMPORTANT (for U.K. Customers)

DO NOT cut off the mains plug from this equipment.

If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not provided with a mains plug, or one has to be fitted, then follow the instructions given below:

IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW

: EARTH

BLUE

: NEUTRAL

BROWN

: LIVE

WARNING: This apparatus must be earthed.

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol ç or coloured GREEN or GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover.

IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN.

For CANADA

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la class A est conforme à la norme NMB-003 du Canada

CE Marketing Information

a)Applicable Electromagnetic Environment: E4

b)Peak inrush current: 7A

For U.S.A

TO THE USER

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residental area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CAUTION

Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user’s authority to operate this equipment.

For the consumers in Europe

WARNING

This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

Pour les utilisateurs en Europe

AVERTISSEMENT

Il s’agit d’un produit de Classe A. Dans un environnement domestique, cet appareil peut provoquer des interférences radio, dans ce cas l’utilisateur peut être amené à prendre des mesures appropriées.

Für Kunden in Europa

Warnung

Dies ist eine Einrichtung, welche die Funk-Entstörung nach Klasse A besitzt. Diese Einrichtung kann im Wohnbereich Funkstörungen versursachen; in diesem Fall kann vom Betrieber verlang werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen.

2 TASCAM FW-1884 Owner’s Manual

Image 2
Contents Professional Control Surface / FireWire Audio-MIDI Interface For Canada Important Safety PrecautionsImportant for U.K. Customers CE Marketing InformationImportant Safety Instructions Table of Contents Overview FeaturesIntroduction System Requirements BoxSpecial notes for touch-faders Nomenclature Used In The ManualSoftware application notes Copyright, etcControls And Indicators Front Panel IllustrationRear Panel Illustration Front Panel Control Descriptions Shortcut Keys Controls And Indicators Controls And Indicators Controls And Indicators Controls And Indicators Rear Panel Control Descriptions Adat Lightpipe and 2-channel InputFireWire IEEE-1394 Connections Global Controls Functional OverviewControl Surface Modes Midi Routing Controls Dedicated Computer ControlsDedicated Modifier Keys Expected Sample Rate Clock System ControlsClock Source Monitoring and Metering Modes Hold Peak HoldNative Protocol Computer Control Mode General NotesControl Surface Modes and Operation Open the FW-1884 Control Panel Select the Settings tab Mackie Emulation ProtocolMidi Control Mode General Notes HUI Emulation ProtocolPowered on and connected, the display will look like this Customizing Midi Control MessagesProgramming Keys Programming Encoders Programming FadersHidden functions Monitor Mix Mode General NotesBanking Audio I/O and the Monitor MixerSolo modes Monitoring SetupsSetting Input Levels Select Host Computer Interfacing Control PanelHost Computer Interfacing Routing TAB Midi Programming TAB Control surface issues Troubleshooting and SupportAudio Issues Contacting Us Incorrect Surface ResponseAnalog I/O SpecificationsAppendices Digital I/OOverall System Specifications Misc. I/OSignal delay All control surface modes Dimensional drawing FW-1884 Hidden FunctionsMidi Ctrl mode MON MIX mode FW-1884

FW-1884 specifications

The Tascam FW-1884 is a versatile audio interface and control surface that caters to the needs of both musicians and audio engineers. Designed for both studio and live applications, the FW-1884 combines impressive features with user-friendly functionalities, making it a staple in many audio production setups.

One of the standout characteristics of the Tascam FW-1884 is its integrated FireWire connectivity, allowing for high-speed data transfer between the device and a computer. This ensures low latency and reliable performance during recording and playback. Supporting a 24-bit/96 kHz audio resolution, it provides superior sound quality, ideal for professional recording environments.

The FW-1884 features eight analog inputs, equipped with high-quality microphone preamps. These preamps offer phantom power for condenser microphones, making it suitable for a wide range of recording scenarios, from vocals to instruments. With its gain control and LED metering, users can easily manage input levels, ensuring clarity and precision in recordings.

Additionally, the unit includes eight line outputs, allowing for flexible routing options. The ability to monitor mixes in real time is enhanced further by the built-in digital mixer, which provides users with EQ and dynamics processing, crucial for shaping the sound before it even hits the DAW.

In terms of control surface functionality, the FW-1884 boasts a comprehensive array of faders and knobs. With motorized faders and customizable buttons, this device offers tactile control over various DAWs such as Pro Tools, Logic Pro, and Cubase. Its MIDI capabilities also allow users to integrate the FW-1884 into their existing setups seamlessly, controlling virtual instruments and other MIDI devices.

Built with durability in mind, the FW-1884 features a robust chassis, ensuring it withstands the rigors of frequent transport for live performances or on-location recording. The device also includes a comprehensive software package, providing users with tools to get started instantly.

In conclusion, the Tascam FW-1884 stands out as a reliable and powerful audio interface and control surface. With its combination of high-quality sound, flexible routing options, extensive control features, and durable design, it caters to professionals and enthusiasts alike, making it a valuable asset in any audio production environment.