Tascam FW-1884 owner manual Functional Overview, Control Surface Modes, Global Controls

Page 18

3 – Functional Overview

3.1Control Surface Modes

The FW-1884 control surface is extremely versatile, and can be used to control a computer application, to control an audio input monitor mix, and to send MIDI messages to external devices via its MIDI outputs.

The FW-1884’s control surface is always in one of three modes: Computer Control Mode, MIDI Control

Mode or Monitor Mix Mode. Each mode has a dedi- cated illuminated key, labeled COMPUTER, MIDI

CTRL, and MON MIX, respectively. Only one of these keys may be selected and illuminated at one time. Pressing one of these keys activates its designated mode and illuminates its associated LED.

For more information on Control Surface modes, please refer to section 4, “Control Surface Modes and Operation”, and to the Application Notes for your soft- ware.

3.2Global Controls

Certain controls operate globally; that is, they function the same way regardless of which control surface mode is selected. These controls are:

MASTER FADER – Any movement of the master fader is always communicated to the host computer, the MIDI control surface and the monitor mixer.

There is always one, and only one master fader for the entire system.

ROUTE key – This is used to route data from the MIDI inputs to the MIDI outputs. It also performs other functions as detailed elsewhere in this manual.

PFL key – This key is always used to toggle the state of the Solo function from PFL (Pre-Fader Listen) to Solo-In-Place. For more details on this function, please refer to section 4.3, “Monitor Mix Mode – (General Notes)”.

CONTROL SURFACE MODE keys – These three keys are used to select the current control surface mode. This is their only function. Only one control surface mode (and hence only one key) can be selected at a time.

CONTROL PANEL key – This key always opens the FW-1884 control panel on the host computer, assuming it is connected and powered on.

“Hidden” functions The following functions are not printed on the control surface panel, but are avail- able in all modes.

SHIFT+CTRL+P.RESET (LATCH)

Reset meter peaks

SHIFT+MIDI CTRL

Enter MIDI Programming mode if host computer is attached

18 TASCAM FW-1884 Owner’s Manual

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Professional Control Surface / FireWire Audio-MIDI Interface For Canada Important Safety PrecautionsImportant for U.K. Customers CE Marketing InformationImportant Safety Instructions Table of Contents Features IntroductionOverview System Requirements BoxSpecial notes for touch-faders Nomenclature Used In The ManualSoftware application notes Copyright, etcControls And Indicators Front Panel IllustrationRear Panel Illustration Front Panel Control Descriptions Shortcut Keys Controls And Indicators Controls And Indicators Controls And Indicators Controls And Indicators Rear Panel Control Descriptions Adat Lightpipe and 2-channel InputFireWire IEEE-1394 Connections Functional Overview Control Surface ModesGlobal Controls Dedicated Computer Controls Dedicated Modifier KeysMidi Routing Controls Clock System Controls Clock SourceExpected Sample Rate Monitoring and Metering Modes Hold Peak HoldComputer Control Mode General Notes Control Surface Modes and OperationNative Protocol Open the FW-1884 Control Panel Select the Settings tab Mackie Emulation ProtocolMidi Control Mode General Notes HUI Emulation ProtocolPowered on and connected, the display will look like this Customizing Midi Control MessagesProgramming Keys Programming Encoders Programming FadersHidden functions Monitor Mix Mode General NotesBanking Audio I/O and the Monitor MixerMonitoring Setups Setting Input LevelsSolo modes Select Host Computer Interfacing Control PanelHost Computer Interfacing Routing TAB Midi Programming TAB Troubleshooting and Support Audio IssuesControl surface issues Contacting Us Incorrect Surface ResponseAnalog I/O SpecificationsAppendices Digital I/OOverall System Specifications Misc. I/OSignal delay Dimensional drawing FW-1884 Hidden Functions Midi Ctrl modeAll control surface modes MON MIX mode FW-1884

FW-1884 specifications

The Tascam FW-1884 is a versatile audio interface and control surface that caters to the needs of both musicians and audio engineers. Designed for both studio and live applications, the FW-1884 combines impressive features with user-friendly functionalities, making it a staple in many audio production setups.

One of the standout characteristics of the Tascam FW-1884 is its integrated FireWire connectivity, allowing for high-speed data transfer between the device and a computer. This ensures low latency and reliable performance during recording and playback. Supporting a 24-bit/96 kHz audio resolution, it provides superior sound quality, ideal for professional recording environments.

The FW-1884 features eight analog inputs, equipped with high-quality microphone preamps. These preamps offer phantom power for condenser microphones, making it suitable for a wide range of recording scenarios, from vocals to instruments. With its gain control and LED metering, users can easily manage input levels, ensuring clarity and precision in recordings.

Additionally, the unit includes eight line outputs, allowing for flexible routing options. The ability to monitor mixes in real time is enhanced further by the built-in digital mixer, which provides users with EQ and dynamics processing, crucial for shaping the sound before it even hits the DAW.

In terms of control surface functionality, the FW-1884 boasts a comprehensive array of faders and knobs. With motorized faders and customizable buttons, this device offers tactile control over various DAWs such as Pro Tools, Logic Pro, and Cubase. Its MIDI capabilities also allow users to integrate the FW-1884 into their existing setups seamlessly, controlling virtual instruments and other MIDI devices.

Built with durability in mind, the FW-1884 features a robust chassis, ensuring it withstands the rigors of frequent transport for live performances or on-location recording. The device also includes a comprehensive software package, providing users with tools to get started instantly.

In conclusion, the Tascam FW-1884 stands out as a reliable and powerful audio interface and control surface. With its combination of high-quality sound, flexible routing options, extensive control features, and durable design, it caters to professionals and enthusiasts alike, making it a valuable asset in any audio production environment.
Top Page Image Contents