Pioneer HTP-330, SX-SW330, S-ST330 Using this system for TV audio, Connect the power cord.2

Page 11

Connecting up

Do not connect the supplied speakers to any amplifier other than the one supplied with this system. Connection to any other amplifier may result in malfunction or fire.

The center speakers and front/surround speakers are designed with different impedance values. Be sure to identify and connect the speakers correctly since improper connections may result in degraded sound or operation.

6If you have a DVD player or other source1 component you want to connect, connect it now before connecting the power cord in the next step.

See Connecting auxiliary components on page 23 for how to connect a digital source component.

7Connect the power cord.2

Connect the power cord to AC inlet on the receiver subwoofer. Connect the power cord to a wall socket.

Using this system for TV audio

If your TV has a stereo audio output you can connect it to this system and enjoy surround TV sound.

Important

When connecting this system, be sure to switch power off and disconnect the power cord from the wall socket. Connect the power cord to the wall socket only after completing all other connections.

AUDIO INPUT

 

 

 

 

 

 

ITAL

 

ANALOG

 

 

 

 

DVR 2

DIGITAL

 

 

 

 

TICAL)

(OPTICAL)

 

 

 

 

 

 

 

 

 

L

FM UNBAL 75

AM LOOP ANTENNA

 

 

MCACC

 

 

AUDIO INPUT

 

 

 

SETUP MIC

CONTROL IN

 

 

 

 

 

 

 

DIGITAL

 

 

 

SYSTEM CONNECTOR CONTROL

SPEAKERS

DVD/DVR1

DVD/DVR2

DIGITAL

ANALOG

 

OUT

SUBWOOFER

R SURROUND L

(COAXIAL)

(OPTICAL)

(OPTICAL)

 

 

 

 

R

 

 

 

L

 

 

 

 

 

 

 

R

USE ONLY WITH DISPLAY UNIT.

SEE INSTRUCTION MANUAL.

CENTER

R

FRONT

L

AC IN

 

 

 

1

To Audio output

TV

1Connect the audio output jacks on your TV to the ANALOG input jacks on the receiver subwoofer.

Use the red/white stereo audio cable (not supplied) for this connection. Make sure you match the left and right outputs with their corresponding inputs for correct stereo sound.

You can use the ANALOG input jacks for any analog source you want, such as a tape deck, etc.

02

English

Note

1 Make sure to connect a TV or monitor (for video sources) to take advantage of this system’s home theater potential. Please refer to the instruction manual supplied with your TV or monitor for connection details.

2 • Do not use any power cord other than the one supplied with this system.

• Do not use the supplied power cord for any purpose other than connecting to this system.

11

En

Image 11
Contents HTP-330 Operating Environment Thank you for buying this Pioneer productContents Home theater sound setup Speaker Setup GuideSpeaker Setup Guide Chapter Safety precautions when setting upUse the adhesive side of the pads to attach them to Speaker Setup GuideAttach the smaller non-skid pads to the base Subwoofer as shownBracket Standard surround setupBefore mounting Speaker Setup Guide Wall mounting the speakersAdditional notes on speaker placement PrecautionsFM antenna AM loop antenna Connecting upConnecting up Chapter Basic connectionsConnect the AM and FM antennas1 Connecting upCable To Receiver subwoofer Assemble the AM loop antenna Connect each speakerTo AC outlet Receiver subwooferSpeaker system Cable Surround left BlueConnect the power cord.2 Using this system for TV audioDisplay Controls and displaysControls and displays Chapter Display unitControls and displays Remote control Putting the batteries in the remote control Controls and displays Using the remote controlGetting started Chapter System demo settingUsing the Auto Mcacc setup for optimal surround sound Getting startedListening to your system Chapter Auto listening modeDolby Pro Logic II Music settings Listening to your systemListening in stereo Listening to your system Using Front Stage Surround AdvanceUsing Advanced Surround Using the Sound RetrieverEnhancing dialogue Using Quiet and Midnight listening modesAdjusting the bass and treble Listening to your systemListening to the radio Listening to the radioListening to the radio Chapter ‘AM 9K/10K’, then press Enter Setting then press Enter to confirmChanging the frequency step Using the Setup menu Surround sound settingsSurround sound settings Chapter Dual mono setting Surround sound settingsAdjusting the channel levels using the test tone Other connections Chapter Connecting auxiliary componentsConnecting external antennas Other connectionsAutomatic plasma display volume muting SR+ Setup for Pioneer plasma displaysAbout control out connections Using the SR+ mode with a Pioneer plasma displayAutomatic plasma display input switching Other connectionsAdditional information Using the TV remote control buttons Additional information Installation and maintenanceSetting up the remote to control your Hints on installationAdditional information Preset code listGeneral Additional information TroubleshootingTuner Error MessagesGlossary ST330 Speaker system Additional information SpecificationsD3-4-2-1-7cAChH 請確認包裝箱內有下列項目的物品。 接收重低音 (SX-SW330)包裝箱:揚聲器 ( S-ST330)包裝箱: 使用測試音調整聲道位準家庭劇院音效設置 揚聲器設置指南揚聲器設置指南 設置時應注意的安全措施揚聲器系統接線。 將較小的防滑墊黏貼於每個前置、中置與環繞揚聲器堆疊揚聲器並使用支架固定。 用支架固定。 標準環繞設置前置、中置和環繞揚聲器有固定孔,可用於將揚聲器固定 於牆上。 揚聲器設置指南 將揚聲器固定於牆上關於揚聲器擺設的其他注意事項 固定前顯示連接線 02 接線 基本連接FM 天線 AM 迴路天線組裝 AM 迴路天線。 連接所有揚聲器。 System Connector 插孔。連接線 至接收重低音 固定顯示裝置的墊塊並連接。完成連接時,調整連接線位置。如果揚聲器以支架固 定,請如圖所示將連接線固定在支架的溝槽中。 02 接線揚聲器系統 右環繞 (灰色) (綠色) 右前置 (紅色) 聆聽位置 連接線 左環繞 (藍色) 左前置 (白色) 至AC 電源插座Analog 輸入插孔。 使用此系統作為電視音效輸出接上電源線。2 將電視上的音效輸出插孔連接到接收重低音的顯示幕 控制與顯示03 控制與顯示 顯示裝置輸入選擇按鍵 控制與顯示 遙控器打開遙控器背面的電池槽蓋。 請依照指示( , ),將兩顆 AA/R6 乾電池放入 電池槽中。 闔上電池蓋。 03 控制與顯示 使用遙控器裝入遙控器電池 按下 MCACC。 按下 SETUP。將麥克風接上後面板的 Mcacc Setup MIC 插孔。 開始操作以環繞音效聆聽 使用系統收聽音效05 使用系統收聽音效 自動聆聽模式使用 「聲音修正器」功能 使用系統收聽音效 使用前段環繞聲模式使用 「先進環繞聲」功能 以立體聲聆聽調整低音及高音 05 使用系統收聽音效 使用 「音場補正等化」功能加強對白 使用 「寂靜」及 「午夜」聆聽模式收聽廣播 收聽廣播改變頻率間隔 06 收聽廣播使用 左/右游標 按鍵,選擇 DRC,然後按 下 ENTER。 選擇以立體聲或多聲道播放來源。完成後按下 ENTER。 按下 Test TONE。 DRC MID - 適中設定值CH1 Mono (預設)- 僅播放聲道 CH2 Mono - 僅播放聲道 聆聽外接音效來源 其他接線其他接線 連接附屬裝置先鋒電漿顯示器 08 其他接線 將此裝置連接先鋒電漿顯示器先鋒電漿顯示器的 SR+ 設定 電漿顯示器自動靜音功能按下遙控器上的 SR+。 使用 左/右游標 按鍵,選擇 SR+ ON,然後 按下 ENTER。 關於控制輸出連接SR+ 模式與先鋒電漿顯示器搭配使用 電漿顯示器自動輸入切換STANDBY/ON 按鍵。 其他資訊CD TYPE,然後按下 ENTER。 安裝提示 TV Volume 用於調整電視機音量 TV Channel 用於轉換電視機頻道其他資訊 安裝與維護 設定遙控器以控制電視機預設代碼表 09 其他資訊問題 解決辦法 其他資訊 故障排除96K 詞彙表錯誤訊息 中置揚聲器 AM 調諧器部分 SX-SW330音效多聲道接收重低音前置/環繞揚聲器 擴大器部分Pioneer Corporation

HTP-330, S-ST330, SX-SW330 specifications

The Pioneer HTP-330, S-ST330, and SX-SW330 represent a sophisticated home theater system designed for audio enthusiasts seeking an immersive sound experience. These units combine cutting-edge technologies with user-friendly functionality, making them ideal for both movie lovers and music aficionados.

The HTP-330 is a complete home theater package that includes a receiver, subwoofer, and satellite speakers. One of its standout features is the incorporation of Dolby TrueHD and DTS-HD Master Audio decoding, which ensures lossless audio quality for high-definition video formats. This enables users to experience cinema-like sound right in their living rooms, enhancing the impact of movies and TV shows.

The S-ST330, with its sleek design, offers a stylish addition to any home décor. Featuring multiple amplification channels, it provides an impressive output that fills larger spaces with dynamic sound. The speakers are engineered with high-quality drivers, ensuring clear highs and deep lows, which are essential for a balanced audio experience.

One of the significant technological advancements in this series is the integration of HDMI connectivity. The HTP-330 supports multiple HDMI inputs, allowing seamless switching between various devices, such as gaming consoles, Blu-ray players, and streaming devices. This simplifies the setup process and reduces cable clutter, giving users a more organized home theater environment.

The SX-SW330 subwoofer complements the system with its powerful low-frequency output, providing a solid foundation for music and cinematic soundtracks. With its adjustable crossover frequency and phase control, users can customize the bass response to match their specific preferences and room acoustics.

Another prominent feature is the easy setup process facilitated by auto-calibration technology. The receiver can automatically adjust the speaker settings based on the room’s unique acoustics, saving users time while ensuring optimal sound performance.

Wireless technology is also a hallmark of these components, with options for Bluetooth and Wi-Fi connectivity. This allows users to stream music directly from their smartphones or tablets without the hassle of wires, enhancing convenience and flexibility.

In summary, the Pioneer HTP-330, S-ST330, and SX-SW330 deliver exceptional audio performance wrapped in a stylish and modern package. With their advanced features, such as high-definition audio decoding, HDMI connectivity, and adjustable subwoofer settings, these systems are perfect for anyone looking to elevate their home entertainment experience. Whether hosting a movie night or enjoying a concert, these units provide a captivating sound environment that satisfies even the most discerning listeners.