Pioneer SSP-LX70ST Hdmi mode setting, About Hdmi, Control mode in order to operate the receiver

Page 36

08Other connections

1Use an HDMI cable to connect the HDMI IN 1 to 3 interconnect on this receiver subwoofer to an HDMI output on your HDMI component.

Once this receiver subwoofer is properly connected to your HDMI component, the HDMI indicator (red) lights up on the display unit when you watch HDMI contents.

2Use an HDMI cable to connect the HDMI OUT interconnect on this receiver subwoofer to an HDMI interconnect on a HDMI-compatible display.

•The arrow on the cable connector body should be facing right for correct alignment with the connector on the player.

ENTER

 

3

Select ‘HDMI Mode’, then press ENTER.

ENTER

 

4

Adjust the setting then press ENTER to

confirm.

 

•AMP Mode – Output an HDMI audio signal from this unit.

•Through Mode – Output an HDMI audio signal from a TV or plasma television.

The HDMI THROUGH indicator lights.

3Use the HDMI 1 to 3 button to select the HDMI input you’ve connected to (for example, HDMI 2).

You can also use the display unit INPUT SELECTOR to carry out this operation.

•Set the HDMI Mode in HDMI mode setting below to Through Mode if you want to hear HDMI audio output from your TV or plasma television (no sound will be heard from this receiver subwoofer).

•If the video signal does not appear on your TV or plasma television, try adjusting the resolution settings on your component or display.

HDMI mode setting

Specifies the routing of the HDMI audio signal out of this receiver subwoofer (amp) or through to a TV or plasma television. You cannot use a number of sound functions of this unit when HDMI Mode is set to Through Mode.

 

Important

•

RCV Press to set the remote control to receiver

 

control mode in order to operate the receiver

 

subwoofer (make sure that the LCD displays the

 

RECEIVER screen).

1

SETUP Press SETUP.

 

ENTER

2

Select ‘HDMI Setup’ then press ENTER.

About HDMI

HDMI (High-Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High-bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant displays.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio. HDMI features include uncom- pressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

36

En

Page 35 Page 37
Image 36
Page 35 Page 37
Contents HTP-LX Thank you for buying this Pioneer product Operating EnvironmentVentilation Caution Contents Accessory box AS-LX70 What’s in the boxAdditional information Receiver subwoofer SX-LX70W boxSpeaker Setup Guide Speaker Setup Guide ChapterSafety precautions when setting up Home theater sound setupSpeaker Setup Guide Additional notes on speaker placementConnect the speaker system Non-skid pads xConnecting up Connecting up ChapterReceiver subwoofer Side panelConnecting up Back of display unitRear panel Connecting up Basic connections Receiver subwoofer Display unitDisplay cable AM loop antenna FM antennaBlack Red + Color-coded wire Assemble the AM loop antennaConnect the AM and FM antennas1 Connect each speakerReceiver subwoofer To Hdmi inputControls and displays Controls and displays ChapterDisplay unit Controls and displays DisplayControls and displays Remote control Operating the receiver subwooferOperating the built-in FM/AM tuner LCD touch screenOperating Pioneer plasma televisions and TVs Home MenuCH RTN CH EnterPlay Mode TOP Menu / Disc NavigatorMenu Home Menu DispTOP Menu Audio ZoomSubtitle Disp HDD DVDCM Back commercial back CM Skip commercial skipPutting the batteries in the remote control JukeboxREC Stop RECControls and displays Using the remote control Operating the remote controlUsing the LCD touch screen Choosing and operating a source componentUsing the Auto Mcacc setup for optimal surround sound Getting startedGetting started Chapter Auto listening mode Listening to your systemListening to your system Chapter Effective Sound for optimum soundUsing Advanced Surround Center image settingDolby Pro Logic II Music settings Listening to your systemUsing Front Stage Surround Advance Genre Sync ModeUsing the Sound Retriever Listening in stereoListening to your system Listening with Mcacc Effect Listening to the radio Listening to the radio ChapterListening to the radio Listening to station presets Memorizing stationsChanging the frequency step Surround sound settings Surround sound settings ChapterUsing the Sound Setup menu Speaker distance setting1Surround sound settings Dual mono settingDynamic Range Control Adjusting the channel levels using the test tone Using the Virtual Surround Back modeLFE Attenuate Connecting auxiliary components Connecting for digital audioConnecting an analog audio component Other connectionsConnecting an iPod Other connectionsListening to an external audio source Other connections Connecting external antennas Connecting using HdmiHdmi mode setting Control mode in order to operate the receiverAbout Hdmi Receiver screenMaking the Hdmi Control connections Hdmi Control-compatible Pioneer plasma televisionSetting the Hdmi options Setting the Hdmi Control modeHdmi Control Before using synchronization Synchronized amp modeSetting up the remote to control your TV Setting the sleep timerAdditional information Additional information ChapterAdditional information TV Preset code list Manufacturer CodesAdditional information Resetting the system Installation and maintenanceHints on installation Surround sound formatsAdditional information Additional information Troubleshooting Through ModeGeneral Antenna refer to Connecting external antennas on TunerDisplayed Messages Sacd DTS-HDHdmi C.ERR 2C Hdmi C.ERRAdditional information Specifications Accessories Accessory box AS-LX70SSP-LX70ST Satellite Speaker D3-4-2-1-7cAChH Page 使用 「自動 MCACC」設定以達最佳環繞音效 使用測試音調整聲道位準Hdmi Control 請確認包裝箱內有下列項目的物品。遙控器 （第 15 頁） 清潔布01 揚聲器設定指南 設定時應注意的安全措施家庭劇院音效設定 準備揚聲器揚聲器設定指南 揚聲器系統接線關於揚聲器擺設的其他注意事項 不使用隨附的揚聲器支座時02 接線 接收重低音揚聲器 側面板顯示裝置背面 後面板02 接線 基本連接 顯示裝置 接收重低音揚聲器顯示連接線 AM迴路天線 前置／ 中置揚聲器 （左側） 環繞聲 （右側）連接顯示裝置與接收重低音揚聲器。 組裝 AM 迴路天線。連接所有揚聲器。 顏色代碼的接頭 （連接至接收重低音揚聲器）02 接線 接收重低音揚聲器關於連接數位來源設備的方式，請參閱第 33 頁。 將重低音揚聲器連接至電視機。控制與顯示 顯示裝置頂部按鈕 前面板顯示03 控制與顯示 顯示幕選擇直接聲音時 （即關閉有效聲音時）指示燈會亮起 （第 24 頁）。遙控器 操作接收重低音揚聲器如需使用遙控器的詳細資訊，請參閱第 22 頁上的操 按下可清除任何輸入的內容並重新輸入。 用於搜尋電台頻率。按下可進入音效選單，進而調整低音與高音等。 用於選擇預設電台。操作先鋒電漿電視和一般電視機 Home Menu Zoom 13 數字按鍵Return Zoom Audio12 數字按鍵 CM Back （返回廣告） CM Skip （略過廣告）裝入遙控器電池 13 數字按鍵17 錄製控制按鍵 03 控制與顯示 使用遙控器 操作遙控器使用液晶觸控畫面 開始操作 使用 「自動 MCACC」設定以達最佳環 繞音效請將麥克風置於正常的聆聽位置。 若接收重低音揚聲器關閉，按下 Receiver 將其電源開啟。05 聆聽您的系統輸出的音效 有效聲音 （適用於最佳聲音）自動聆聽模式 以環繞音效聆聽聆聽您的系統輸出的音效 使用 「先進環繞聲」功能Dolby Pro Logic II Music 設定值 調整設定值，然後按下 Enter 確認。使用前場前環繞聲模式 類型同步化模式使用 「聲音修正器」功能 以立體聲聆聽聆聽您的系統輸出的音效 Mcacc 效果聆聽 調整低音及高音 使用 「午夜」、「響度」及 「寂靜」聆 聽模式調整聲音延遲 06 收聽廣播 收聽廣播改善 FM 接收不良 改善 AM 音效不佳記憶電台 收聽預設電台改變頻率間隔 按鍵選擇聲道，或使用 鍵調整該聲道的位準。 Enter 在完成時按下。按鍵選擇揚聲器，或使用 按鍵調整距離。開啟 「Sound Setup」選單。 選擇設定。C. High 或 D.R.C. Mid 用於 Dolby TrueHD 以外 的訊號。 C. Mid －中等設定使用虛擬後環繞模式 LFE 衰減其他接線 連接輔助設備數位音訊的連接 連接類比音效設備08 其他接線 聆聽外接音訊來源連接 iPod 其他接線 連接外接天線 關於控制輸出連接使用 Hdmi 連接 Control OUT 插孔。Hdmi 模式設定 關於 Hdmi使用 Hdmi 連接線，將本接收重低音揚聲器的 出插孔。Hdmi Control 進行 Hdmi Control 連接與HDMI Control 相容的 與HDMI Control相容的設定 Hdmi 選項 設定 Hdmi Control 模式將電漿電視直接連接至本機。中斷與其他擴大器或 影音轉換器 （例如 Hdmi 開關）的直接連接可能導 致操作上的錯誤。 若要使本功能發揮最大效用，建議您不要將 Hdmi 設 備連接至電漿電視，而是直接連接至本機的 Hdmi 端子。使用同步化之前 同步化擴大器模式10 其他資訊 10 章 調暗顯示幕亮度設定睡眠定時器 設定遙控器以控制電視機其他資訊 電視機預設代碼表 請注意，指定正確預設代碼後，可能只有特定功能可供控制，或者表中的製造商代碼無法用於您目前的機種。10 其他資訊 重設系統 環繞音效格式 安裝與維護安裝提示 Dolby Pro Logic II 和 Dolby Surround其他資訊 中錄製的主要音源，不但未損失任何資料且保留了音10 其他資訊 故障排除 調諧器 10 其他資訊 顯示的訊息DTS Express Dolby TrueHD Dolby D+ No MIC UnknowSSP-LX70ST 衛星揚聲器 Pioneer Corporation

HTP-LX70, AS-LX70, SX-LX70W, SSP-LX70ST specifications

The Pioneer HTP-LX70, SX-LX70W, SSP-LX70ST, and AS-LX70 represent a culmination of advanced audio technologies designed to deliver a premium home theater experience. Each component showcases an array of features that cater to audiophiles and casual listeners alike, ensuring versatility and high-quality sound.

The HTP-LX70 is an outstanding home theater package that includes a powerful AV receiver and a complete set of speakers. It supports the latest audio formats, including Dolby Atmos and DTS:X, creating an immersive surround sound environment. The receiver is equipped with Pioneer’s MCACC (Multi-Channel Acoustic Calibration System), which automatically adjusts the speaker settings to optimize sound quality based on the unique characteristics of the room.

The SX-LX70W is a powerful stereo amplifier designed for high-fidelity audio reproduction. It delivers a robust output with low distortion, ensuring clear sound across various frequency ranges. The amplifier features a sleek design, combining aesthetics with functionality. It supports multiple connectivity options, including Bluetooth and Wi-Fi, allowing users to stream their favorite music effortlessly from various devices.

Complementing the system is the SSP-LX70ST, a sophisticated processor-preamp that handles the decoding of high-resolution audio formats. It features advanced digital signal processing capabilities, making it suitable for both music and cinema applications. The SSP-LX70ST provides numerous audio and video inputs, accommodating various sources, from gaming consoles to Blu-ray players. Its user-friendly interface allows for easy navigation and adjustments.

Finally, the AS-LX70 is a compact yet powerful active subwoofer that enhances the low-frequency response of any audio setup. With its adjustable crossover and phase control, the subwoofer integrates seamlessly with the other speakers, delivering deep, rich bass that enhances the overall listening experience. Its sleek cabinet design reduces resonance and optimizes sound performance.

In conclusion, the Pioneer HTP-LX70, SX-LX70W, SSP-LX70ST, and AS-LX70 together form an exceptional home entertainment solution, incorporating cutting-edge technologies and thoughtful design to ensure audio fidelity and versatility. Whether for movie nights or music sessions, this lineup offers an unparalleled listening experience, highlighting Pioneer’s commitment to quality and innovation. Whether you are an audiophile seeking the best sound reproduction, or simply looking to enhance your home theater setup, these products are crafted to meet the diverse needs of today’s consumers, creating the perfect audio environment for any occasion.
Top Page Image Contents