ASSEMBLY
1. Unpacking
A. The
Unpacking and assembly should take place on a soft surface such ast carpeting or a furniture blanket to protect the fi ne fi nish.
B. Open the Stand box fi rst and remove the foam end blocks, accessories and assembly parts.
C. The feet for the stand are stored inside the 2 foam blocks in the center of the stand box. Cut the tape and remove them from the foam blocks and set aside.
D1
D2
D3
D4
D5D7
D1
D6
D. Unpack the assembly parts.
You should have:
1.2 Stand Feet wrapped in protective fi lm
2.1 Phillips Screwdriver
3.8 Large cover caps
4.4 Small covers caps
5.4 Cam Locks
6.2 Paired speaker connection wires
7.1 Power cord
8.1 Instruction Manual
E. Using 2 people, lift the stand out of the box and place it on a soft surface upside down. Remove the protective outer packing materials. Leave the clear, thin protective fi lm in place for now.
7