DISK - LOAD SONG
Load Song -
Load Song retrieves one of your previously stored Music Performances or MIDI File songs from the floppy disk.
Since the Standard MIDI file that you have on disk and your musical performance in the pianos music recorder share the same memory, selecting a song file may bring up a confirmation pop up screen, saying it will overwrite the song that is currently in the sequencer (music recorder).
1.
DISK
2.
CURSOR
3.
ESCAPE
ENTER
4.
PLAY/PAUSE STOP RECORD
5.
DISK MENU
Load Song |
|
| Utility |
|
|
|
|
|
|
Save Song |
|
| Play Disk |
|
Place a Floppy Disk (HD 1.4mb) into the Disk Drive.
Make sure that there are some of your previous musical performances on it or MIDI
Press the Disk Button and select the Load Song menu.
The list of song files contained on the disk will be displayed on the screen.
If there are more than 4 songs on the disk, the SCREEN RIGHT/LEFT indicators will be lit.
Press the Screen Right Button to access the additional song files on the disk.
Using the Cursor Buttons highlight the song file you would like to load and press the ENTER button.
NOTE: A caution screen will appear asking if you are sure you want to load the song file sequence.
“OK” the command.
A progress bar will be displayed showing the status of the load.
A disk menu screen will be displayed after your selected song file has been loaded.
Press the START / STOP or the PLAY/PAUSE button.
The song you have just loaded into the sequencer (music recorder) will begin to play.
73