Local (Local Control) (Default: On): set to on to send data simulta- neously to the keyboard’s speakers and as MIDI data. Set to oFF to send data only as MIDI data (the speakers on the keyboard remain silent).
AcompOut (Accompaniment Out) (Default: Off): set to on to send auto accompaniment as MIDI data. Set to oFF to turn it off.
3.Within 5 seconds, use + or – to change the setting of the parameter.
DUMPING/IMPORTING DATA
The
First make connections from the MIDI IN and MIDI OUT terminals to an external device using MIDI cables.
Note: Some software does not support MIDI exclusive data.
See the Owner’s Manual that comes with the receiving device for details.
2.Repeatedly press TRANSPOSE/ TUNE/MIDI on the
3.Within 5 seconds, press to start data send. Sending appears. The
Importing Data
Follow these steps to import dumped data from another device.
1.Repeatedly press TRANSPOSE/ TUNE/MIDI so the display shows
BulkSnd?.
2.Within 5 seconds repeatedly press
or so the display shows
BulkRcv?.
3.Within 5 seconds, press to pre- pare the keyboard to receive data.
4.Start the send operation on the sending device. See the manual that comes with the connected device for details. The
Dumping Data
Follow these steps to dump data from the keyboard to an external device.
1.Put the other device in its receive standby mode.
45