1.Slide VOLUME to MIN (minimum).
2.To turn on the keyboard, press POWER.
The POWER indicator lights and the display turns on.
3.Slide MODE to NORMAL.
4.Slide VOLUME toward MAX slightly and begin playing the keyboard.
•To select an
Page 9.
To save power, the keyboard automatically turns off after about 6 minutes if you do not press a key. To turn on the keyboard again, press POWER. To cancel auto power off, turn on the keyboard while holding down TONE. The next time you turn the keyboard off then back on again, it will automatically turn off after about 6 minutes.
To prevent hearing damage, always set the keyboard’s volume to MIN before you turn it on.
Basic Operation
The keyboard automatically selects the tone GRAND PIANO (No. 000) when you turn the power on. Each time you turn it on after that, it selects the last selected tone. To select a different tone, see “Using the Preset Tones”.
Using the Preset Tones
•To play auto accompaniment, see “Using Auto Accompaniment” on Page 10.
5.Slide VOLUME toward MAX to increase the sound level or toward MIN to decrease it.
6.To turn off the keyboard, press POWER. The POWER indicator and the keyboard’s display turn off.
Your keyboard can play two prepro- grammed demonstration tunes. To start the demonstration, press DEMO. The keyboard plays the first demonstration tune (No. 0). To select the other tune, press – or + on the keypad. The selected tune’s number appears and the tune plays.
The treble and bass
The demo tune number appears here.clefs show the notes as they play.
•The keyboard has
•Most tones on this keyboard have been recorded and processed using a technique called digital sampling. To ensure a high level of tonal quality, samples are taken in the low, mid, and high ranges and are then combined to sound amazingly close to the originals. You might notice very slight differences in volume or sound quality for some tones when you play them at different positions on the keyboard. This is an unavoidable result of multiple sampling and is not a malfunction.
•Repeatedly press + or – to select the next highest or lowest numbered tone.
•If you enter an incorrect first digit, press TONE to clear your entry, then enter the correct digit.
•When you select one of the drum sets (tone numbers
•Tone numbers
Basic Operation
The keyboard at the bottom of the display shows the location of the keys being pressed.
Your keyboard can sound like 248 different musical instruments or sound effects. The TONES list on the keyboard’s top panel shows the name and
Follow these steps to select and play a preset tone.
The bar graph shows the sound level on each of the
16 channels. See “Using the Mixer” on Page 12.
1.Press TONE. and the current tone’s number appear.
2.To play a different tone, choose a preset tone from the TONES list and enter its
number with zeroes. As you press the keys, the selected digits appear.
3.Play the keyboard to hear the selected tone and adjust VOLUME to the desired level.
5