Solid State Logic 82BXEM01A Stereo Outputs Direct Channel Outs CH OP, Post Fader, Stereo Cue Send

Stereo Outputs - Direct Channel Outs (CH OP), Post Fader

Each X-Panda Stereo channel features a dedicated Channel Output (CH OP). This provides a direct Stereo Output.

Normally this is sourced Pre Fader but by engaging the “POST” switch that source becomes Post Fader. The Channel Direct Outputs (CH OP) are primarily used to feed the inputs of your chosen recorder or DAW. On the rear panel connection panel of X- Panda they are labelled “CHAN OUT ST 1-4”.

(Note that there is no “ALT” option on the X-Panda Stereo Channels)

Stereo Cue Send

Provides a Stereo Send primarily for Cue purposes. By default the signal is sourced pre fader but additionally it can be sourced after the Channel Fader by selecting “POST”. It may be worth bearing in mind that if you are using X-Panda in conjunction with an X-Desk and on the X-Desk are using the “Cue to MIX” function you may wish to turn this CUE ST send off on the X-Panda Stereo channels.

FX Sends 1&2

There are two FX sends on the Stereo channels and they take a summed Mono signal of your Stereo Input source. By default the signal is sourced post Fader.

6