Solid State Logic 82BXEM01A manual Inputs Channel Input CH IP, Alternate Input ALT

Page 6

The X-Panda Mono Channel Strip

Inputs – Channel Input (CH IP), Alternate Input (ALT)

Each one of the 8 mono channel inputs (CH IP) on the X- Panda has a choice of two Line Inputs. The first input is traditionally sourced from the Output of a microphone pre amplifier, D.I box or perhaps even a line level instrument. These connections are labelled “LINE IN 9-16(1-8)”on the rear of the desk. They are so labelled due to the fact that you may be using X-Panda stand alone or in conjunction with an X- Desk or indeed additional audio equipment.

The second Line input is selected via the switch labelled “ALT” and is most commonly used for Monitor return playback signals, perhaps from a Digital Audio Workstation (DAW). These connections are labelled “ALT IN 9-16(1-8)”on the rear of the desk.

Once you have selected your Input, it then has a +/- 20 dB gain Level Trim, indented in the centre at Unity Gain and a Phase Reverse “Ø” button.

The Post gain signal can also then be affected by Insert processing (perhaps an EQ or Dynamics processor.) by pressing the “INS” switch. It is worth noting that in SSL tradition the Insert Send is always active, which can be creatively utilised if you so wish. Engaging the “INS” switch will activate the Insert return. (All Mono Channel Inserts are connected via the “INSERT SEND/RETURN 9-16(1-8)”connections on the rear of the desk)

The Tri-colour Led under the level control is a 3 colour indictor of signal presence and level. By default the following audio levels are indicted by the following LED states:

Green

=

-24 dBu

Yellow =

+4 dBu

Red

=

+21 dBu

Remember it is possible to rescale the X-Panda’s metering to a +18dBu (as opposed to the standard +24 dBu) scale via the rear panel DIP switch. This would then provide the following channel meter scale.

Green

=

-24 dBu

Yellow =

0 dBu

Red

=

+16 dBu

Note: The Red LED will light before actual audio clipping, which can serve as a useful warning when recording.

2

Image 6
Contents Panda User’s Guide Page Contents Page Expand your studio with an SSL Inputs Channel Input CH IP, Alternate Input ALT Green 24 dBu Yellow = +4 dBu Red +21 dBuGreen 24 dBu Yellow = DBu Red +16 dBu Outputs Direct Channel Outs CH OP, Post Fader Stereo Cue Post Fader, ALT sourceFX Sends 1&2 and Stereo Returns ST RET Channel Pan, Fader Cut & Solo Stereo Inputs Channel Input CH IP Green = 24 dBu Yellow = +4 dBu Red = +21 dBuGreen = 24 dBu Yellow = DBu Red = +16 dBu Stereo Outputs Direct Channel Outs CH OP, Post Fader Stereo Cue SendFX Sends 1&2 Channel Balance, Fader, Cut & Solo Rear DIP Switch Options Cascading X-Panda and X-DeskUse with another audio mixing console Using X-Panda with an X-Rack Summing SystemMix Bus Link Using X-Panda with other audio equipment Use with another analogue summing systemALT in 9-16 Sub 25 way female Racking your X-PandaRear Panel Connections Line in 9-16 Sub 25 way female Insert Send 9-16 Sub 25 way femaleProvides AFL Output Stereo Channels Insert ReturnStereo Channels Direct Output CH OP MIX Bus OutputBegbroke, Oxford, England OX5 1RU +44 01865