Sony OXF-R3 operation manual For customers in the U.S.A

Page 2

CAUTION

Installation has to be done by a SONY authorized technician.

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

VORSICHT

Um Feuergefahr und die Gefahr eines elektrischen Schlages zu vermeiden, darf das Gerät weder Regen noch Feuchtigkeit ausgesetzt werden.

Um einen elektrischen Schlag zu vermeiden, darf das Gehäuse nicht geöffnet werden. Überlassen Sie Wartungsarbeiten stets nur einem Fachmann.

For customers in the U.S.A

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC rules.

!This symbol is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

For customers in Europe

This product with CE marking complies with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.

Compliance with these directives implies conformity to the following European standards:

•EN60950 : Product Safety

•EN55103-1: Electromagnetic Interference (Emission)

•EN55103-2: Electromagnetic Susceptibility (Imunity)

This product is intended for use in the following Electromagnetic Environment(s)

E4 (controlled EMC environment, ex. TV studio)

Pour les clients européens

Ce produit portant la marque CE est conforme à la fois à la Directive sur la compatibilité électromagnétique (EMC) (89/336/CEE) et à la Directive sur les basses tensions (73/23/CEE) émises par la Commission de la Communauté européenne.

La conformité à cas directives implique la conformtié aux normes eropéennes suivantes:

•EN60950 : Sécurité des produits

•EN55103-1 : Interférence électromagnétiques (émission)

•EN55103-2 : Sensibilité électromagnétique (immunité)

Ce produit est prévu pour étre utilisé dans les environments électromagnétiques suivants:

E4 (environment EMC contrôlé ex. studio de télévision).

Für Kunden in Europa

Dieses Product besitzt die CE-Kennzeichnung und erfüllt sowahl die EMV-Directive (89/336/EEC) als auch die Directive Niederspannung (73/23/CEE) der EG- Kommission.

Die Erfüllung dieser Directiven bedeutet Konformität für die folgenden Europäischen Normen:

•EN60950 : Produktsicherheit

•EN55103-1 : Electromagnetische Interferenz (Emission)

•EN55103-2 : Electromagnetische Empfindlichkeit (Immunität)

Dies Produkt ist für den Einsatz unter folgenden electromagnetischen Bedingungen ausgelegt:

E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio)

Page 1 Page 3
Image 2
Page 1 Page 3
Contents OXF-R3 For customers in the U.S.A Spitzenstrom Peak Inrush CurrentAppel de Courant de Crête Do not USE ANY Other Power Cord OXF-CP3048PS onlyTable of Contents Table of Contents Chapter Technical Descriptions Session Management Chapter Session Management Appendixes About This Manual Purpose and intended readersAbout This Manual Conventions used in this manual Related manuals Glossary of Terms About This ManualContents OverviewOverview1 Overview Control Console Data Flow OverviewStudio Machine Room Signal Flow OverviewCUE & Auxiliary Sends Page Powering The OXF-R3 OXF1-OXFR3 Start-R3-UpStartProcedure-Up Start-Up ProcedurePowering The OXF-R3 Powering the OXF-R3 OXF2OXF-R3 Shutdown-R3 ShutdownProcedure Shutdown ProcedurePowering the OXF-R3 Page Getting Started Multitrack, Routing for Multitrack, Super Send GroupsThe1 TheControlControlSurface Surface Control Surface Elements Control Surface Getting Started OXF-R3 panel locations Getting Started Fader2 FaderPagingPaging Channel IN-LINE ConsoleAssignable Channel Processing Input Channel & Inserts Free5 FreeAssignAssignArea and DynamicsArea and Dynamics Multitrack, Routing for Multitrack, Super Send MULTI-FORMAT ButtonsSends7 Sends Select8 SelectTo FadersTo Faders SendChans Têsend Select To Faders Select9 SelectTo PansTo Pans 310-10BasicBasicConsoleConsoleOperationsOperations GeneralTo Route a Mic or Line Input to the Main Output Bus To a Super Send Group SSG To Send Signals to Tracks on Tape Basic Console Operations To Monitor Signals To and From Tape To Set Up a Stereo Headphone Mix for Foldback 1 O/P 24Chapter 3 Getting Started To Equalise Monitor Signal Post Multitrack At the same panel, select ‘DYN’ in a window To Insert Dynamics Post Multitrack Return Basic Console Operations To Bounce TracksTo Set Up Super Send Groups from Multitrack ‘DYN’ in one of the eight windows. Do this using To Link Compressor Side-Chains in a Group On the LCD screen above the dynamics controls Getting Started

OXF-R3 specifications

The Sony OXF-R3 is a state-of-the-art digital mixing console that combines advanced technology with user-friendly design, catering to the needs of modern audio professionals. Launched as part of Sony's renowned OXF product line, this console is engineered for high-end live sound, broadcast mixing, and studio applications, delivering exceptional audio quality and flexibility.

One of the standout features of the OXF-R3 is its extensive number of input channels, which provides audio engineers with ample flexibility for managing complex mixing tasks. It supports up to 96 simultaneous inputs, making it suitable for large-scale productions. Each channel is equipped with high-resolution 24-bit/192kHz audio processing, ensuring crystal-clear sound reproduction across the entire frequency spectrum.

The OXF-R3 integrates advanced digital signal processing technologies, allowing for intricate sound shaping and manipulation. It features a comprehensive suite of onboard effects, including reverb, compression, and equalization, all of which can be applied in real-time. This versatility makes it an ideal choice for both live performance and studio recording environments.

One of the key characteristics of the OXF-R3 is its intuitive user interface. The console is equipped with a large touch-screen display that provides easy access to settings and parameters, simplifying the mixing process even in high-pressure situations. Additionally, the OXF-R3 offers various physical controls, including faders, knobs, and buttons, allowing for tactile mixing experiences that many audio professionals prefer.

In terms of connectivity, the OXF-R3 shines with numerous input and output options, including analog, digital, and even multi-channel network audio interfaces. This flexibility ensures compatibility with a wide range of audio equipment and systems, enhancing its usability across different scenarios.

The console also embraces the latest advancements in remote control and automation technologies. Users can operate the OXF-R3 from a distance using compatible devices, facilitating seamless adjustments during live performances and recordings.

The build quality of the OXF-R3 reflects Sony’s commitment to durability and reliability. Constructed from robust materials, it is designed to withstand the rigors of both studio and live environments, ensuring longevity and consistent performance over time.

In conclusion, the Sony OXF-R3 is a powerful digital mixing console that delivers a blend of advanced features, exceptional audio quality, and user-friendly design. Its versatility makes it an invaluable tool for sound engineers and producers alike, solidifying its place in the audio technology landscape. With its innovative technologies and robust construction, the OXF-R3 continues to set a high standard in the world of professional audio mixing.
Top Page Image Contents