Sony OXF-R3 operation manual To Set Up Super Send Groups from Multitrack

Page 55

3-10-11 To Set Up Super Send Groups from Multitrack

1

4,8

5

2

6 3 7

Chapter 3 Getting Started

1	Press {ACCESS} for the first Channel to be routed
	to a Super Send Group (SSG).
2	Make sure {CHANS} is selected on the Select To
	Faders panel (fire-up default).
3	Make sure {SUPERÊSGsÊ1-8} is selected in the SSG
	masters section.
4	At the Routing panel, de-select {ÊLÊ} and {ÊRÊ} .
5	At the same panel, select the SSGs required,
	{1/9} and {2/10} in this case.

6 At the Select To Faders panel (SEL section), select {SUPERÊSGsÊ1-8} , then adjust the Fader to 0dB in the Central Faders panel.

7 Above the SSG 1 level knob select {MAIN} and its {ACCESS} .

8 At the top of the Routing panel select {ÊLÊ} .

9 Repeat steps 7 and 8 for SSG 2 but select {ÊRÊ} at the Routing panel.

10 Repeat steps 1 to 5 for further channels.

Chapter 3 Getting Started 3-29

Image 55

Contents OXF-R3 For customers in the U.S.A Appel de Courant de Crête Peak Inrush CurrentSpitzenstrom OXF-CP3048PS only Do not USE ANY Other Power CordTable of Contents Table of Contents Chapter Technical Descriptions Session Management Chapter Session Management Appendixes Purpose and intended readers About This ManualAbout This Manual Conventions used in this manual Related manuals About This Manual Glossary of TermsOverview ContentsOverview1 Overview Control Console Overview Data FlowStudio Machine Room Overview Signal FlowCUE & Auxiliary Sends Page Powering The OXF-R3 Start-Up Procedure OXF1-OXFR3 Start-R3-UpStartProcedure-UpPowering The OXF-R3 Powering the OXF-R3 Shutdown Procedure OXF2OXF-R3 Shutdown-R3 ShutdownProcedurePowering the OXF-R3 Page Multitrack, Routing for Multitrack, Super Send Groups Getting StartedThe1 TheControlControlSurface Surface Control Surface Elements Control Surface Getting Started OXF-R3 panel locations Getting Started Channel IN-LINE Console Fader2 FaderPagingPagingAssignable Channel Processing Input Channel & Inserts Free5 FreeAssignAssignArea and DynamicsArea and Dynamics MULTI-FORMAT Buttons Multitrack, Routing for Multitrack, Super SendSends7 Sends Send Select8 SelectTo FadersTo FadersChans Têsend Select To Faders Select9 SelectTo PansTo Pans General 310-10BasicBasicConsoleConsoleOperationsOperationsTo Route a Mic or Line Input to the Main Output Bus To a Super Send Group SSG To Send Signals to Tracks on Tape Basic Console Operations To Monitor Signals To and From Tape To Set Up a Stereo Headphone Mix for Foldback 1 O/P 24Chapter 3 Getting Started To Equalise Monitor Signal Post Multitrack At the same panel, select ‘DYN’ in a window To Insert Dynamics Post Multitrack Return To Bounce Tracks Basic Console OperationsTo Set Up Super Send Groups from Multitrack ‘DYN’ in one of the eight windows. Do this using To Link Compressor Side-Chains in a Group On the LCD screen above the dynamics controls Getting Started