3.Dynamics to (DYN TO)switches
a.BYPASS will bypass the entire dynamics section. Note that selecting BYPASS does not result in a signal which is flat, but rather one which mimics the flat response of the SSL channel strip hardware.
b.CH OUT moves the dynamics to the output of the
SSL E EQ Section Controls (top to bottom)
1.Low and High Pass filters (white knobs):
Low pass: 18 dB/octave, 15 Hz – 350 Hz
High pass: 12 dB/octave, 3 kHz – 20 kHz
When SPLIT is selected, the low pass and high pass filters are placed before the dynamics processors in the chain.
2.High frequency EQ section (red knobs): Range 1.5 kHz – 16 kHz. Gain range is ±18 dB for bell shape, ±16.5 dB for shelving. Selecting BELL changes the HF EQ from shelf to bell shape.
3.High medium frequency EQ section (green knobs): Range 600 Hz – 7 kHz. As in the LMF EQ section, Q is continuously adjustable from 0.1 to 3.5. Gain varies from ±18 dB when Q is set at 3.5 to ±15 dB when Q is set at 0.1.
4.Low medium frequency EQ section (blue knobs): Range 200 Hz – 2.5 kHz. Q is continuously adjustable from 0.1 to 3.5. Gain varies from ±18 dB when Q is set at 3.5 to ±15 dB when Q is set at 0.1.
5.Low frequency EQ section (black knobs): Range 30 Hz – 450 Hz. Gain range ±16.5 dB, shelving, ±18 dB, bell shape.
SSL G EQ Section Controls (top to bottom)
1.Low and High Pass filters (white knobs):
Low pass: 18 dB/octave, 15 Hz – 350 Hz
High pass: 12 dB/octave, 3 kHz – 20 kHz
When SPLIT is selected, the low pass and high pass filters are placed before the dynamics processors in the chain.
2.High frequency EQ section (red knobs): Range 1.5 kHz – 16 kHz. Gain range is ±17 dB shelving.
3.High medium frequency EQ section (green knobs): Range 600 Hz – 7 kHz. As in the LMF EQ section, Q is continuously adjustable from 0.1 to 3.5. Gain varies from ±18 dB when Q is set at 3.5 to ±15 dB when Q is set at 0.1. Pushing the HMF X3 will multiply the frequency by 3.
4.Low medium frequency EQ section (blue knobs): Range 200 Hz – 2.5 kHz. Q is continuously adjustable from 0.1 to 3.5. Gain varies from ±18 dB when Q is set at 3.5 to ±15 dB when Q is set at 0.1. Pushing the LMF /3 will divide the frequency by 3.
5.Low frequency EQ section (black knobs): Range 30 Hz – 450 Hz. Gain range ±17 dB, shelving.
6.EQ TO switches
a.BYPASS This button bypasses the EQ section. Note that selecting BYPASS does not result in a signal which is flat, but rather one which mimics the flat response of the SSL channel strip hardware.
b.DYN