Waves SSL 4000 E, SSL 4000 G manual Waves System Bar, Master Section Controls and Indicators

Page 7

Master Section Controls and Indicators

On the bottom right of the SSL Channel Strip are the master gain controls and level indicator.

1.Level Indicator Levels are expressed in dBFS, although all parameters are expressed as dBu.

2.INPUT and OUTPUT switches above the meter allow you to toggle the level indicator between input and output.

3.An Input Trim Button enables you to trim the input to the channel by ± 18db. The plug-in is aligned so that -18 dBFS = 0.

4.The Output Fader controls the output level of the processor.

5.Analogue on/off. Classic analogue processors necessarily create more noise and harmonic distortions than modern digital devices. This is, in part, what gives analogue processors their desired sound. By default, all components of the SSL 4000 Collection operate in a mode which enables emulation of the SSL analogue console. However, there may be times when you prefer to use this plug-in without these special attributes. Switching off Analogue disables analogue emulation.

6.Phase Reverse (Ø) This button reverses the phase of the input signal.

4.The Waves System Bar

All Waves plug-ins share a common feature, the Waves System Bar, which takes care of most administrative functions you will encounter while working with Waves plug-ins. Since the Waves System Bar is the same on practically all Waves plug-ins, you will always know how to file, compare, load and copy the parameters of a Waves plug-in, even if you have never before worked with that particular processor.

Commands common to all Waves plug-ins:

Undo undoes the last performed action.

Redo redoes the last undone action. There are 6 levels of undo and redo.

Setup A/B toggles between two sets of parameters within the same processor – useful when comparing different parameter settings in order to achieve optimal results.

Copy A->Bcopies the current settings to the second setup register. Save used for saving presets in the Waves file format (.xps)

There are two options for saving:

Save to new file: creates a new .xps file wherein multiple presets can be saved.

Save into preset menu: saves the preset into the default list of the plug-in. Load allows recalling presets from files.

Once a file is selected, its first preset will load and become active. Other presets in the file will be listed under the preset’s name in the Load menu.

You can also load factory presets and user presets (saved using “Save into preset menu.)

Pressing the ? button will open the manual for the plug-in you are using.

Image 7
Contents SSL 4000 E-Channel SSL 4000 G-Channel Introduction Waves SSL 4000 CollectionSSL E-Channel Description of the SSL 4000 E-Channel/ G-Channel plug-inSSL Channel Latency SSL 4000 Channel Controls and Indicators Expander/Gate green knobs Dynamics Sections Controls top to bottomDynamics to DYN TOswitches Commands common to all Waves plug-ins Master Section Controls and IndicatorsWaves System Bar