Roland VR-5 manual Specifications

■Specifications

VIDEO		RECORDER
	[Video] NTSC or PAL (ITU601)		[Format] MP4 (.mp4)
		Recording Format	Video Codec: MPEG-4 Visual
	[PC-RGB] 640 x 480/120 Hz, 800 x 600/120 Hz, 832 x 624/75 Hz,
			Audio Codec: MP3 (MPEG-1 Audio Layer-3)
Video Format	1024 x 768/80 Hz, 1152 x 864/80 Hz, 1152 x 870/75 Hz,
	1280 x 1024/75 Hz, 1600 x 1200/60 Hz (RGB VH: positive/negative logic)	Bit Rate	2 Mbps, 4 Mbps, 6 Mbps
	* VESA DMT Version 1.0 Revision 10 conform.	Media	SD Memory Card (1 to 2 GByte)
	* The refresh rate is the maximum value of each resolution.		SDHC Memory Card (Max 32 GByte), Class 4 or greater
Video Sampling Rate	[Video] 4:2:2 (Y:B-Y:R-Y), 8 bits, 13.5 MHz	File System	FAT32 (Max file size of 4 GByte)
Frame Synchronizer	5 systems	Movie Size	[TV Size] NTSC (720 x 480)
	[Video (composite)] 1.0 Vp-p, 75 ohms		PAL (720 x 576)
Input Level and	[S-video] Luminance signal: 1.0 Vp-p, 75 ohms		Recorded file is up to 4 GByte.
	Chrominance signal: 0.286 mVp-p, 75 ohms (NTSC) /0.3 mVp-p,		Bit Rate at 2 Mbps: approximately 4 hours/4 GByte
Impedance		Max Recording Time
	75 ohms (PAL)		Bit Rate at 4 Mbps: approximately 2 hours/4 GByte
	[PC-RGB] 0.7 Vp-p, 75 ohms (H, V: 5 V TTL)		Bit Rate at 6 Mbps: approximately 80 minutes/4 GByte
Output Level and	[Video (composite)] 1.0 Vp-p, 75 ohms		[Video File Format] .MP4, .AVI
	[S-video] Luminance signal: 1.0 Vp-p, 75 ohms	Supported Playback	Video Codec: MPEG-4 Visual,
Impedance	Chrominance signal: 0.286 mVp-p, 75 ohms (NTSC) /0.3 mVp-p,		Audio Codec: MP3 (MPEG-1 Audio Layer-3)
		Format
	75 ohms (PAL)		[Audio File Format] .WAV, .MP3
	[Input] Video (composite): BNC type x 3, S-video: 4-pin mini DIN type x 3,		[Picture File Format] .BMP, .JPG
	PC-RGB: D-Sub 15-pin Shrink type x 1	OTHER CONNECTORS
Connectors	* Inputs 1 to 3; When S-video is simultaneously input to 1 to 3, S-video takes priority		[Resolution] Setup to NTSC: 480p
	[Output] Video (composite): BNC type x 2, S-video: 4-pin mini DIN type x 2	HDMI Connector	Setup to PAL: 576p
	[Preview Output] Video (composite): BNC type x 1		OUTPUT or PREVIEW OUTPUT
AUDIO		USB A Type	For USB Storage device,
Internal Processing	Sample Rate: 24-bit/48.0 kHz		For USB Video Stream output (Support UVC/UAC)
		Connector
Input Level	[AUX AUDIO INPUT] +4 dBu to –62 dBu (variable) Max: +22 dBu		USB 2.0 High-Speed
	[Channel 1/2/3] –10 dBu Max: +8 dBu [PC AUDIO] –15 dBu Max: +3 dBu	Remote Control	MIDI IN: 5-pin DIN type x 1 jack
Input Impedance	[AUX AUDIO INPUT] XLR type: 4 k ohms, TRS phone type: 6 k ohms	Interfaces	MIDI OUT/THRU: 5-pin DIN type x 1 jack
	[Channel 1/2/3 and PC AUDIO] 15 k ohms	OTHERS
	[AUX AUDIO INPUT] XLR-3-31 type (balanced, phantom power),	Transition Effects	Switcher: Cut, Mix, Hard edge wipe, Soft edge wipe
Input Connectors	1/4 inch TRS phone type (balanced/unbalanced) * TRS type takes priority		DSK: Cut, Mix
	[Channel 1/2/3] RCA phono type [PC AUDIO] Stereo miniature type	Video Effects	Luminance key, Chroma key, Picture-in-picture, Split
Output Level	[AUDIO OUTPUT] –10 dBu Max: +8 dBu [PHONES] 50 mW + 50 mW	Power Supply	DC 12 V (AC Adaptor: PSB-7U)
Output Impedance	[AUDIO OUTPUT] XLR type: 600 ohms, TRS phone type: 1 k ohms,	Current Draw	3 A (AC Adaptor: PSB-7U)
	[PHONES] 10 ohms	Dimensions	376 (W) x 314 (D) x 133 (H) mm,
Output Connectors	[AUDIO OUTPUT] XLR-3-32 type (balanced), RCA phono type		14-13/16 (W) x 12-3/8 (D) x 5-1/4 (H) inches
	[PHONES] Stereo 1/4 inch phone type	Weight	4.3 kg, 9 lbs 8 oz (without AC Adaptor)

*O dBu=0.775 Vrms

■Rear Panel

■Dimensions

Unit: mm

Roland Systems Group, a member of the worldwide group of Roland companies, is dedicated to the support of audio and video professionals demanding excellence in both performance and system design. Through the development and support of video and audio products, we endeavor to improve workflow and maximize creative possibilities.

Using V-LINK, musicians can “play” video from their electronic instrument when used with video products. With V-LINK, musicians have a powerful interface for realtime audio and video integration.

Ensuring high quality while protecting the environment: Roland is ISO9001 and ISO14001 certified

At Roland, several group companies have obtained ISO9001 certification. In addition, in January 1999, Roland also received ISO14001 international environmental management system certification. We’re actively seeking ways to maintain harmony with the environment. (ISO=International Standardization Organization: an organization for the promotion of standardization of international units and terms. They provide different categories of certification: ISO9001 Series certification is a product quality certification for products that undergo a certain level of quality control from the design stage to the after service stage; ISO14001 Series certification is for environment-related standards. Each member of the Roland Group is striving to obtain certification.)

Copyright 2010 Roland Corporation. All right reserved.

All trademarks and logos are the property of their respective companies.

All specification and appearances are subject to change without notice.

www.rolandsystemsgroup.com Printed in Japan. NOV. 2010 RAM-20011 GEN