Roland AT15 Before You Start Playing, Setting Up the Music Stand, Connecting the Power Cord

Page 16

Before You Start Playing

Setting Up the Music Stand

fig.01-03

1.Attach the music stand by inserting it into the two holes.

Connecting the Power Cord

1.First, make sure that the [Power On] switch at the panel’s left side is OFF (not pushed in).

fig.01-05

Master Volume

Min Max

2.Press the [Power On] switch to turn on the power.

The power will turn on, and the Basic Screen appears on

the display.

fig.01-06

Lower position

ON

2.Connect the supplied power cord to the AC Inlet connector, then plug the other end into an AC

outlet.

fig.01-04

*Only use the power cord supplied with this instrument.

*Whenever you do not intend to use the instrument for extended periods of time, pull out the power cord from the AC outlet.

Turning the Power On and Off

*Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

■Tuning On the Power

1.Make sure of the following before the power is

turned on.

•Is the power cord correctly connected to the AC inlet? •Is the power cord correctly connected to the AC outlet? •Is the [Master Volume] knob (located at the left of the Lower keyboard) set to the Min (minimum) position?

*This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

3.Turn the [Master Volume] knob or depress the expression pedal to adjust the volume to a suitable level.

Turning the [Master Volume] knob towards “Max” increases the volume; turning the knob towards “Min” decreases the volume. Likewise, pressing down on the expression pedal increases the volume, while easing up

on the pedal decreases the volume.

fig.01-07

decrease the volume

increase the volume

■Turning Off the Power

1.Before switching the power off, set the [Master Volume] knob to the Min (minimum) position.

2.Press the [Power On] switch to turn off the

power.

fig.01-06

Upper position

OFF

*If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. Refer to “Power Supply” (p. 5).

16

Image 16

Contents Page Important Safety Instructions 001 002a Using the Unit Safely Power Supply PlacementMaintenance Additional PrecautionsHandling Floppy Disks Before Using Floppy DisksHandling the Floppy Disk Drive Main Features Basic Concepts of the Atelier SeriesMain Features Conventions Used in This ManualContents Contents Using the Play FunctionsUsing the Registration Buttons Adding Various Effects to a VoiceContents Settings for the Composer Adjusting the EffectsVarious Other Settings Connecting with External DevicesContents Appendices Memo Panel Descriptions Rhythm select buttons → p Setting Up the Music Stand Connecting the Power CordTuning On the Power Turning Off the PowerRestoring All the Factory Default Settings Using HeadphonesSome Notes on Using Headphones Adjusting the Contrast of the Screen Displaying Basic ScreensRhythm Screen Composer ScreenSelecting and Playing Sounds Listening to the Demo SongsSelecting and Playing Sounds If the following screen appears Selecting Voices About the Voices and PartsFunctions of the Upper/Lower/Pedal Bass Sound Select Buttons Press the Upper Organ Jazz button indicator lights Press the Pedal Organ button indicator lightsSelecting the Upper and Lower Voices Selecting Pedal Bass VoicePress the Solo Trumpet button indicator lights Selecting Solo VoiceSelecting a Voice Using the Others Button Voice name appears in the displayRhythm performance Drums/SFX Adjust the Volume BalancePedal Voice Bass part of Automatic Accompaniment Use the Value and + buttons to set the amount of shift Transpose the Pitch in Octave Units Octave ShiftPress the Utility button Press the Pedal To Lower button so its indicator goes out Press the Drums/SFX button indicator lightsSustaining Notes Played on the Lower Keyboard Playing Drum Sound or Sound Effects on the KeyboardChanging the Drum/SFX Set Press the Drums/SFX button once againUsing the Rhythm Performance Using the Rhythms of the Disk ButtonSelecting a Rhythm Press a Rhythm button to select a Rhythm groupStarting with an Intro Starting at the Press of a ButtonMaking the Intro Short and Simple Using the Rhythm Performance Starting without an Intro Stopping the RhythmStopping with an Ending Making the Ending Short and SimpleAdding Variety to the Rhythm and Automatic Accompaniment What is a Fill In?Changing the Tempo Press the Intro/Ending or Start/Stop button to stop Rhythm Select a Rhythm p Press the One Touch Program buttonRhythm and Automatic Accompaniment stops Using a Rhythm from a Disk Indicator Eject button Floppy DiskInserting and Ejecting a Floppy Disk Reviewing the Styles on a Music Style DiskLoading Disk Rhythms Into Internal Memory If the following screen appears Copying a Rhythm Saved to the Rhythm Disk Button Using the Rhythm Performance If the following screen appears Deleting a Rhythm Saved to the Rhythm Disk ButtonFollowing screen will be displayed Adding Various Effects to a Voice Press the Harmony Intelligence button indicator lightsAdding Harmony to a Melody Harmony Intelligence Changing the Type of Harmony Intelligence Once again, press the Harmony Intelligence buttonAdding Modulation to the Sound Rotary Effect Effect obtained is equivalent to speakersBeing rapidly rotated Effect simulating the slow rotation of speakersReverb Effect Part Upper, Lower, Pedal Sustain EffectBasic screen reappear Using the Play Functions Lower keyboard Solo voice Transposing to a Different Key Transpose Buttons Press the Transpose and + buttonsAdjusting the Overall Volume Using an Expression Pedal Adding Decay to the Sound Damper PedalPress the right Foot Switch toward the right Using the Foot SwitchPress the left Foot Switch toward the left Using the Registration Buttons Storing RegistrationsHow to Recall a Registration Recalling Voices and Other Panel SettingsRecalling a Registration Changing the Timing of Recalling RegistrationsSettings by pressing the Manual button Automatically Registering When You Switch Panel SettingsAssigning a Name to a Registration Set Using the Registration Buttons Copying Only the Name of a Registration Only the name of the Registration will be recalledPress the Save button to execute the save operation If you wish to update the contents of the Registration deta Press the Reset button to cancel the procedureRewriting of the Registration will be canceled Registration will be rewrittenLoading a Set of Registrations Loading Previously Saved Registration Sets Into the AT-15Press the Load button to execute loading Loading an Individual Registration To cancel the operation, press the Utility buttonPress the Rec button once again Deleting a Set of Registrations from a Floppy Disk Record and Playback Your Performance Playing Back Performance Songs Stored on Floppy Disk SMF Music FilesPlayback of the performance data begins Track whose indicator was turned off will be muted silenced Press the Track Mute button once again indicator lightsSilencing a Specific Track Track Mute Recording a Performance Enter the recording standby mode by pressing the Rec ButtonPress the Play/Stop button to start recording If you wish to erase the performance song If you wish to save the performance song on a floppy diskPress the Reset button Playing Back a Performance SongTo stop playback at any point, press the Play/Stop button Rewinding and Fast Forwarding Through SongsPress the Play/Stop button when your recording is Completed Rec button and the Play/Stop button indicators will go darkRerecording Performance Data Recorded on the AT-15 You can record over recorded performance dataErasing a Performance Song Press the Registration and Save buttons simultaneouslyFormatting Disks Press the Rec button again to perform the Format Changing the Name of a Performance Song Rename New name is now insertedSaving Performance Songs onto Floppy Disk You can select either Original or SMF formatSave data in Atelier format Saving in SMF Format for Atelier Sound ModulesPress the Save button to confirm the format If you wish to update the contents of the performance dataIf the following screen will appear Deleting Performance Songs Stored on Disk When erasing is completed, the basic screen reappearsTo delete the performance song, press the Rec button again Layering a New Recording onto SMF Music Files Press the Rec button to enter record-ready modePress the Play/Stop button to stop recording Re-recording a Performance Saved on Floppy Disk Selected performance data will be loadedChanging the Key When Playing Back Songs Settings for the ComposerChanging the Metronome Setting Adjusting the Metronome Volume Changing the Sound of the MetronomeSetting the Beat Silencing a Specific TrackMuting Individual Channels of Performance Data Expression Pedal OperationsRe-recording the Pedalboard Performance Function During RecordingSwitching the Display of Lyrics On or Off Function During PlaybackSustain Effect Adjusting the EffectsChanging the Sustain Length Changing the Reverb Type Changing the Wall TypeChanging the Depth of the Reverb Using the Foot Switch to Switch Registrations Regist Shift Various Other SettingsTurning Initial Touch On/Off Initial Touch Turning Chord Intelligence On/Off Chord Intelli GlideUsing the Leading Bass Function Leading Bass Changing How the Solo Voice Responds Solo ModeLayering the Solo Voice Lower Voice Solo To Lower Mode Changing the Solo Split Point Solo Split PointPlaying a Count Sound When the Intro Ends Intro Count Down Changing the Sound Count Down Count Down SoundRegistration Arranger Update Arranger Settings Recall Timing Adjust the Standard Pitch Master Tune Selecting the Midi Transmit Channel Tx Midi ChannelMidi in Mode Specifying Transmission of PC Numbers Send PC SwitchSetting PC Numbers Connecting with External Devices Making the ConnectionsIf You’re Using Midi Connecting the AT-15 to a Midi InstrumentTroubleshooting No sound is heardTroubleshooting Bass note of the Automatic Accompaniment does not soundDisplay Messages 100Display Messages 101Voice List 102Drum Set List 103Drum Set List 104Rhythm List Chord List 106Chord List 107Settings That Are Stored After the Power Is Turned Off 108Glossary 109About Atelier Series Sound Generator General MidiGS format SMF with LyricsMidi Implementation Chart 111Main Specifications Main Specifications Connectors Power SupplyPower Consumption DimensionsDemo Song List ProfileHal Vincent Jonas NordwallRosemary Bailey Ric Iannone115 Index 116Index 117Information 118Avis 03238612 ’05-2-4TP