Roland AT15 owner manual Changing the Reverb Type, Changing the Wall Type

Adjusting the Effects

Changing the Reverb Type

You can select from the following 11 types of Reverb:

1.Press the [Utility] button.

2.Press the Menu [ ] and [ ] buttons to select “Reverb.”

3.Press the [Rec] button.

4.Press the Menu [ ] and [ ] buttons to select

“Reverb Type.”

fig.11-04

5.Press the Value [-] and [+] buttons to select a Reverb type.

Setting	Descriptions
ROOM 1	Reverberation of a small room
ROOM 2	Reverberation of a small club
ROOM 3	Reverberation of a large room
HALL 1	Reverberation of a large concert hall
HALL 2	Reverberation of a small concert hall
SMALL CHURCH	The reverberation of a small church
LARGE CHURCH	The reverberation of a large church
CATHEDRAL	The reverberation of a cathedral
PLATE	A bright, metallic Reverberation
DELAY	An echo-like sound repeated several
	times
PAN DELAY	Similarly to the above but where the
	sound is panned between the left and
	right speakers

To return to the basic screen, press the [Utility] button.

Changing the Wall Type

By changing the type of reverb (p. 85) you can experience the feeling of performing in various different locations, and by changing the Wall Type (wall material) you can make further adjustments to the way in which reverberation occurs.

1.Press the [Utility] button.

2.Press the Menu [ ] and [ ] buttons to select “Reverb.”

3.Press the [Rec] button.

4.Press the Menu [ ] and [ ] buttons to select

“Wall Type.”

fig.11-04

5.Press the Value [-] and [+] buttons to select a Wall type.

Setting	Descriptions
DRAPERY	Pleated curtain
CARPET	Carpet
ACOUSTIC TILE	Acoustical tile, sound-absorptive tile
WOOD	Wood
BRICK	Brick
PLASTER	Plaster
CONCRETE	Concrete block
BLOCK
MARBLE	Marble

To return to the basic screen, press the [Utility] button.

85