Using the Registration Buttons
❍If the following screen appears
The following screens appear when a registration has already been saved to
the save destination.
●If you wish to update the contents of the Registration deta
1.Press the [Rec] button.
The Registration will be rewritten.
●If you wish to save the data without erasing the Registration set already on disk
1.Press the [Reset] button to cancel the procedure.
Rewriting of the Registration will be canceled.
2.
3.
Press the Select
Press the [Save] button to save the Registration set.
When the data has been saved, the basic display reappears.
When the Registration set is saved to the floppy disk, the indication of “- -
57