Roland SH-201 specifications Synth Pad

turn the knob slowly.

NOT to damage your hearing or speakers,

* Sudden loud sound may occur. In order

Chapter5 Synth-Programming Examples

3 Synth-Programming Examples

Synth Pad

2 3 5 4 6

1 7

8	11	12
9	10	12

4 Synth-Programming Examples

Sound Ef fects

2 3 4 10 5

1 6 7 8 9

1Choose “PRESET D-8”. The sawtooth wave is selected.

2Press the [WAVE] button of the OSC1 section and select the SUPER SAW.

3Turn the [PW/FEEDBACK] knob of the OSC1 section to the “one o’clock” position.

4Turn the [CUTOFF] knob in the FILTER section all the way left to (MIN). The sound becomes inaudible.

5Press the [TYPE] button in the FILTER section and select HPF. The sound is audible once again.

6Let’s determine the overall timbre. Raise the [D] slider of the FILTER ENV mid-way up and raise the [R] slider all the way up.

7Raise the [DEPTH] slider of the FILTER ENV gradually to determine the overall timbre.

8Turn the [LEVEL] knob of AMP section all the way right to (MAX).

9Raise the [A] slider of AMP ENV mid-way up. The initial attack of the sound becomes slower.

10Raise the [R] slider of the AMP ENV mid-way up. The sound will not die off after you release your fingers from the keyboard now.

11Press the [FX ON] button.

12Turn the [TIME] knob in the EFFECTS section all the way left to (MIN). Turn the [DEPTH] knob to enhance the resonance.

Let’s create a sound effect like a synth drum. This sound is created from deliberately generated sound from the filter.

1Choose “PRESET D-8”. The sawtooth wave is selected.

2Press the [WAVE] button in the OSC1 section and select NOISE.

3Turn the [CUTOFF] knob in the FILTER section all the way left to (MIN). The sound becomes inaudible.

4Turn the [RESONANCE] knob in the FILTER section all the way right to (MAX).

5Raise the [D] and [R] sliders of the FILTER ENV mid-way up.

6Lower the [S] slider of the FILTER ENV all the way down.

7Raise the [DEPTH] slider of the FILTER ENV gradually upward.

8Lower the [A] slider of the AMP ENV all the way down.

9Raise the [S] and [R] sliders of the AMP ENV all the way up.

10As you turn the [KEY FOLLOW] knob rightward a little, you can change sound’s brightness with your key location.

Chapter

5

Synth-Programming Examples

21 22