Pioneer VSX-9110TXV-K Plugging in the receiver, AC outlet, Connecting external antennas

Page 20

03Connecting your equipment

Connecting external antennas

To improve FM reception connect an external FM antenna to the FM UNBAL 75 Ω terminal.

75 Ω coaxial cable

ANTENNA

FM UNBAL 75 Ω

AM LOOP

To improve AM reception, connect a 15 ft. to 18 ft. length of vinyl-coated wire to the AM LOOP terminals without disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

Plugging in the receiver

Only plug in after you have connected all your components to this receiver, including the speakers.

Caution

• Handle the power cord by the plug part. Do not pull

out the plug by tugging the cord, and never touch the

power cord when your hands are wet, as this could

cause a short circuit or electric shock. Do not place

the unit, a piece of furniture, or other object on the

power cord or pinch the cord in any other way. Never

make a knot in the cord or tie it with other cables. The

power cords should be routed so that they are not

likely to be stepped on. A damaged power cord can

cause a fire or give you an electric shock. Check the

power cord once in a while. If you find it damaged,

ask your nearest Pioneer authorized independent

service company for a replacement.

• The receiver should be disconnected by removing the

mains plug from the wall socket when not in regular

use, e.g., when on vacation.

ANTENNA

FM UNBAL 75 Ω

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

15 ft. to 18 ft.

AM LOOP

• Make sure the blue STANDBY/ON light has gone

out before unplugging.

• Plug the power cord into a power outlet.

AC outlet

Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).

Caution

•Do not connect a TV set, monitor, heater, or similar appliance to this unit's AC outlet.

•Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.

•Since a subwoofer or power amplifier can exceed the 100 W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet.

20

En

Page 19 Page 21
Image 20
Page 19 Page 21
Contents VSX-9110TXV-K Federal Communications Declaration of Conformity Model Number VSX-9110TXV-K Responsible Party NameKeep in a Secure AREA. this is for Your Security Information to UserImportant Safety Instructions Contents Other Settings Using other functionsOther connections Additional informationFeatures Before you startBefore you start Chapter Checking what’s in the boxLoading the batteries Installing the receiverBefore you start Ventilation Automatically setting up for surround sound Mcacc Minute guide02 5 minute guide Chapter Introduction to home theaterWait for the test tones to finish then confirm Speaker configuration in the OSDMinute guide Better sound using Phase Control Problems when using the Auto Mcacc Setup02 5 minute guide Playing a sourceRear panel Connecting your equipmentConnecting your equipment Chapter About the video converter Connecting your equipmentWhen making cable connections Connecting your equipment Connecting your TV and DVD player Connecting a satellite/cable receiver or other set-top box342 DVD playerConnecting a DVD/HDD recorder, VCR and other video sources Using the component video jacksUse an optical cable for the connection DVR, VCR, etcConnecting digital audio sources Use a three-way component video cableConnecting analog audio sources Connecting a component to the front panel inputsAbout the WMA9 Pro decoder Tape deck, etcConnecting your equipment Installing your speaker system Connecting the speakersBanana plug connections Bare wire connectionsPlacing the speakers Connecting antennas THX speaker system setupConnecting external antennas Plug the power cord into a power outletPlugging in the receiver AC outletFront panel Controls and displaysControls and displays Chapter Operating range of remote control unit Controls and displaysControls and displays Display Input Select Controls and displays Remote controlReceiver 6TUNE/ST /ENTER StatusMulti OPE ShiftListening to your system Listening to your system ChapterAuto playback Listening in surround sound Standard surround soundUsing the Home THX modes Using the Advanced surround effectsTHX Games Mode Listening to your systemUsing Stream Direct Selecting Mcacc presetsListening in stereo While listening to a source, press McaccListening to your system Choosing the input signal Using the Virtual Surround Back modeUsing Midnight and Loudness Using the Sound RetrieverUsing the tone controls Press Tone to select the frequency you want to adjustUsing the tuner Using the tuner ChapterSaving station presets Listening to the radioUsing the tuner Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Automatic Mcacc ExpertSystem Setup menu MemorySurround back speaker setting If necessary, confirm the speaker configuration in the OSD.1Manual Mcacc setup Fine Channel LevelAdjust the level of the left channel When youre finished, press ReturnFine Speaker Distance Standing WaveSelect ‘Standing Wave’ from the Manual Mcacc setup menu Select ‘EQ Adjust’ from the Manual Mcacc setup menuSelect the channels you want and adjust to your liking Acoustic Calibration EQHow to use Professional Acoustic Calibration EQ How to interpret the graphical outputUsing Professional Acoustic Calibration EQ Select ‘EQ Professional’ then press EnterSelect an option and press Enter EQ OFFData Management Checking Mcacc preset dataCopying Mcacc preset data Manual speaker setup Speaker SettingRenaming Mcacc presets Clearing Mcacc presetsSelect ‘Speaker Setting’ from the Manual SP Setup menu Select ‘Channel Level’ from the Manual SP Setup menuSelect a setup option Confirm your selected setup optionSpeaker Distance Bass Peak LevelTHX Audio Setting CurveConnecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterUsing XM Radio Connecting your XM Radio receiverOther connections Basic playback controlsListening to XM Radio Saving channel presetsUsing XM HD Surround Other connections Connecting using Hdmi About HdmiConnecting the multichannel analog inputs Second Zone speaker B setupSelecting the multichannel analog inputs Use standard RCA/phono jack cables for the connectionsSwitching the speaker system 2nd Zone setting only.1Bi-amping your front speakers Connect your speakers as shown belowLarge Other connections Bi-wiring your speakersConnecting additional amplifiers Using the multi-room controls Basic multi-room setupSurround Back System multi-room setup Other connections Multi-room listeningConnecting an IR receiver Multi-room remote controlsUse the Master Volume dial to adjust the volume Press ControlUsing this receiver with a Pioneer plasma display Pioneer plasma displayUsing the SR+ mode with a Pioneer plasma display Pioneer plasmaDisplay DVD player Satellite receiver, etcOther connections Connecting a PC for Advanced Mcacc output Advanced Mcacc output using your PCOther Settings Other Settings ChapterInput Setup menu Input function default and possible settingsOther Settings Other Setup menuMulti-Room and IR receiver setup SR+ Setup for Pioneer plasma displaysOSD Adjustment Select ‘SR+ Setup’ from the Other Setup menuSelect the ‘PDP Volume Control’ setting you want Select ‘OSD Adjustment’ from the Other Setup menuUsing other functions Using other functions ChapterSetting the AV options Setting What it does OptionsUsing other functions Making an audio or a video recording Reducing the level of an analog signalUsing the sleep timer Watching video and audio sources independentlyUsing other functions Switching the speaker impedanceResetting the system Checking your system settingsDefault system settings Setting DefaultSetting the remote to control other components Selecting preset codes directlyProgramming signals from other remote controls Controlling the rest of your systemErasing one of the remote control button settings Resetting the remote control presetsConfirming preset codes Controlling the rest of your systemProgramming a multi-operation or a shutdown sequence Renaming input source namesDirect function Multi Operation and System Off Using multi operations Using System offSelect the button for the command you want to input From the menu and press EnterControlling the rest of your system Controls for TVs Controls for other componentsButtons Function Components Function ComponentsOperating other Pioneer components with this unit’s sensor Decide which component you want to use the remote sensorTroubleshooting PowerAdditional information Additional information ChapterOther audio problems Additional informationSettings VideoDisplay Professional Calibration EQ graphical outputRemote control Range of remote control unit onXM radio messages Symptom Cause ActionIPod messages Windows Media Audio 9 Professional Additional information Surround sound formatsDolby About THX Listening modes with different input signal formats Stereo 2 channel signal formatsInput signal format Standard Auto SurroundMultichannel signal formats AutoSurround Back speakers Additional information Specifications Cleaning the unitDecibel Level Example To establish a safe levelOnce you have established a comfortable sound level Pioneer Corporation

VSX-9110TXV-K specifications

The Pioneer VSX-9110TXV-K is a high-performance AV receiver designed to cater to the demanding needs of home theater enthusiasts. Combining advanced technology with versatile features, this model stands as a solid choice for anyone looking to enhance their audio-visual experience.

One of the standout features of the VSX-9110TXV-K is its robust power output capability. With 7.1 channels, the receiver delivers a substantial 100 watts per channel, ensuring that movies, music, and games come to life with pristine clarity and impactful sound. The robust amplification not only provides a powerful output but also ensures that every audio detail is captured, from the softest whispers to the loudest explosions.

In terms of connectivity, the VSX-9110TXV-K boasts multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices with ease. It supports 4K Ultra HD video pass-through, ensuring compatibility with the latest high-definition sources. The receiver also features advanced audio decoding technologies, including Dolby Atmos and DTS:X, which create an immersive surround sound environment that transports users right into the center of the action.

The receiver also incorporates Pioneer’s proprietary technologies, such as MCACC (Multi-Channel Acoustic Calibration System), which analyzes the acoustics of the room and automatically adjusts the speaker settings for optimal sound. This ensures a balanced listening experience, tailored specifically to the user’s environment.

The intuitive user interface and comprehensive remote control simplify navigation through the receiver's extensive features. With easy access to streaming services and a variety of input options, users can effortlessly switch between different audio and video sources.

Moreover, the VSX-9110TXV-K is equipped with advanced zone control, allowing users to enjoy audio in multiple rooms simultaneously. This feature enhances the versatility of the receiver, making it perfect for entertaining guests or simply enjoying music throughout the home.

In summary, the Pioneer VSX-9110TXV-K blends power, innovation, and user-friendly features, making it a standout choice for creating a captivating home theater experience. With its rich array of capabilities, it caters to both casual viewers and audiophiles alike, ensuring that every audio and visual experience is nothing short of exceptional.
Top Page Image Contents